Protron PLTV-26M Power?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cequil32
    Senior Member
    • Dec 2012
    • 57
    • United States

    #1

    Protron PLTV-26M Power?

    I have a Protron PLTV-26M TV and when I plug the power cord in/flip switch the status indicator comes on orange then goes to red. I push the power button and the light turns green and the screen flashes but then turns completely off, not status light or response of any kind. I have to unplug it to reset it and it will do it again. I looked at the voltages on the board and it looks like I briefly get the right voltages but it is almost like the psu is going into a protection mode...I have tried unplugging the other cables going to the inverters and such but it still acts the same way. Could this be a short on the psu or something causing it to trip itself completely off?
  • notallbad
    Badcaps Legend
    • Oct 2012
    • 1190
    • UK

    #2
    Re: Protron PLTV-26M Power?

    What no photo of the PSU or a board number.

    Try turning it on with everything connected except the cable to the inverter, what happens now?.

    Comment

    • cequil32
      Senior Member
      • Dec 2012
      • 57
      • United States

      #3
      Re: Protron PLTV-26M Power?

      Without inverter plugged in it still acts the same way

      FSP180-3M02A is the board number

      Comment

      • notallbad
        Badcaps Legend
        • Oct 2012
        • 1190
        • UK

        #4
        Re: Protron PLTV-26M Power?

        Now try disconnecting the connector from the main board to the t-con, any change?

        Comment

        • cequil32
          Senior Member
          • Dec 2012
          • 57
          • United States

          #5
          Re: Protron PLTV-26M Power?

          No change...Can I jumper the PS_On to the 5V standby to turn it on and see if the power supply is the problem?

          Comment

          • notallbad
            Badcaps Legend
            • Oct 2012
            • 1190
            • UK

            #6
            Re: Protron PLTV-26M Power?

            Yes, try that. You'll need a resistor.

            Have you removed the heatsinks on top to inspect the caps for bulging or leaks?

            What voltage do you get across the main filter cap?
            Last edited by notallbad; 10-17-2013, 11:30 AM.

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • Document Archive
              HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
              09-06-2024, 05:59 AM
            • Loading...
            • No more items.
            Working...