What am i missing?i pick this set up dead no standby,when i opened the back you could see the problem a batch of bad caps on the power board, so with all the bad caps replaced and a few more for good luck the power board is now working at full steam on all outputs,i must point out at this stage i have no remote for the set, so i try tuning by the side buttons select DVT with source and then menu, menu comes up but will not select tuning, so i try TV as source this time it lets me go to auto tune but will only tune analogue.i then try with Av as source but menu again will not go to tuning,all the other inputs work when selected with no problems.The main and the DVB board are made by Haier and i know the factory reset but as i say have no remote, so please any suggestions as to what to try next Thanks Flocko
Announcement
Collapse
No announcement yet.
Tecknika LCD32-M3
Collapse
X
-
Re: Tecknika LCD32-M3
Look up the mother board model and try to purchase a remote, being a low end set the remote should just work if not you may have to enter a code.Last edited by ReeceyBurger123; 09-15-2014, 03:50 PM.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
Comment
-
Re: Tecknika LCD32-M3
Hi finntricky yes I am bad I should have came back to finish the post,but seeing as no one got back to me I must have thought Fxxx them. the problem was solved with the correct remote, I tried all the codes on the pound shop remotes they only work some things on the set but not all hope this is of help to you Flocko
Comment
Comment