Announcement

Collapse
No announcement yet.

47lm620t-47lm640t blue screen only

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    47lm620t-47lm640t blue screen only

    just bought these cheap

    lg 47lm620t
    lg 47lm640t

    bought both
    one has a smashed panel still lights up etc

    and the other only has a blue screen with sound

    any ideas before they arrive

    #2
    Re: 47lm620t-47lm640t blue screen only

    right busy working on this lg 47lm620 I have a grey screen no picture backlight and hdmi working as I can here the audio lovely and crisp just no picture


    now ive tested the tcon fuse and I get 12v both sides some times and 0v others backlight seems t sometimes dim and brighten and

    is main fine do you rekon

    im heading toward a psu im hoping as the the 47lm640 has same supply

    Comment


      #3
      Re: 47lm620t-47lm640t blue screen only

      Is it the one with blue screen, now it is grey? Which one that has smashed screen?
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment


        #4
        Re: 47lm620t-47lm640t blue screen only

        47lm640t smashed but psu I think can be swapped

        47lm620t grey screen has backlight no picture but has sound the tcon fuse is 12v's then no 12v's funny that

        could I switch these psu if all connector pins are same voltage value etc as they not the same board but may be compatable

        also heres another one to throw ya

        would it be possible to transport the psu and mainboard from 640t onto screen of the 620t

        47LM620T panel = LC470EUE (SE)(F1)

        47LM640T panel = LC470EUG (PE)(F1) THIS MODEL HAS TCON BUILT INTO AV/MAIN BOARD
        Last edited by wreksta; 09-11-2013, 05:05 PM.

        Comment


          #5
          Re: 47lm620t-47lm640t blue screen only

          If the connectors are the same on the *640 for the panel as the *620, a transplant operation should be possible; whether the patient will survive depends on how heavy the LCD panel is and how much room you have got. (I'm assuming the frames are different so you can't just put main board/PSU/inverter in other TV?)
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #6
            Re: 47lm620t-47lm640t blue screen only

            tom the frame is same and all the boards will fit either
            the psu on 640 is smaller in board size but has the same connector pattern I was going to start with the psu first then do a switch with main+inbuiltcon onto 620 panel just don't want to kill the screen will this kill screen or not just with he codes for panel model being slightyy different
            and I think the 640t panel was more power hungry than the 620t according to the datasheet

            all I want to do with the Frankenstein mod is put the 640t psu and maintcon (tcon is onboard av main ) and latch it straight to screen via the 2 tcon flexi ribbons I just scared incase it ruins pane driver boards


            THE 620T IS 52.4 W POWER CONS
            THE 640T IS 72.6 W POWER CONS

            THE ABOVE SHOULD NOT MATTER AS ILL BE USING THE 620T SCREEN
            Last edited by wreksta; 09-11-2013, 06:39 PM.

            Comment


              #7
              Re: 47lm620t-47lm640t blue screen only

              First off all power connectors are same on both power boards all same connections and ratings


              can i try this power board now?

              Comment


                #8
                Re: 47lm620t-47lm640t blue screen only

                switching parts didn't work so put sets back to normal



                think I found problem the tcon chip is scading hot tom what can cause this its ths one n the picture closest to right screw



                ive measured the fuse on tcon again since set has sound and backlight still measuring 11,8v both ways and meter on ohms at 20k setting gives 0.9.1 one way and 0.7.9 other

                any ideas
                Last edited by wreksta; 09-11-2013, 08:49 PM.

                Comment


                  #9
                  Re: 47lm620t-47lm640t blue screen only

                  Can you read the number on the top of the IC?
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment


                    #10
                    Re: 47lm620t-47lm640t blue screen only

                    ill open the back up again soon are the readings from tcon fuse fine

                    Comment


                      #11
                      Re: 47lm620t-47lm640t blue screen only

                      markings on that ic are

                      ips 65198
                      TI Z8 OR 28
                      AIL 8

                      WHAT WOULD HAVE MADE THIS IC LIKE THAT THOUGH BUDM

                      Comment


                        #12
                        Re: 47lm620t-47lm640t blue screen only

                        General failure or bad panel. Try unplugging panel ribbons. Does it still get burning hot?
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment


                          #13
                          Re: 47lm620t-47lm640t blue screen only

                          I didn't check that will do though when I get home thanks tom

                          Comment


                            #14
                            Re: 47lm620t-47lm640t blue screen only

                            WITH BOTH TOP SCREEN FLEXI CABLES CONNECTED TO TCON THE IC I MENTIONED EARLIER GETS SCORCHNG HOT
                            DISCONNECTED BOTH SCREEN FLEXI CABLES AND TCON IS STONE COLD

                            SO I THOUGHT WHY NOT TRY JUST ONE OF THEM SO I TRIED THIS ONE AND IC GET VERY HOT AGAIN

                            THEN THIS ONE AND THE IS STAYED COOL LETS CHECK THE SCREEN AND YUP HALF A CLEAR PICTURE



                            IS THIS STILL A SUSPECTED PANELFAILURE
                            I HOPE NOT

                            COULD IT BE THE TCON?

                            Comment


                              #15
                              Re: 47lm620t-47lm640t blue screen only

                              Well bit the bullet and took the panel aprt guess what some kind of liquid goo lol think some one spilt a drink on on it

                              gong to need hep on this guys will post all info and photos shortly i think she can be fixed

                              Comment

                              Working...
                              X