Panasonic TX-P42C10Y

kadleca

zbron

Join Date: Jan 2013

Posts: 4

Country: Czech republic
#1

Panasonic TX-P42C10Y

08-20-2013, 12:10 PM

Hallo, everyone
I have TV Panasonic TX-P42C10Y, but it started flashing LED 7 times. There was evidently bad board TXNSC11UBG42. I have replaced with one repased from authorized Panasonic service. Unfortunately it started flashing 6 times. According to Troubleshooting Handbook it shows the same board bad or A board. I am not sure what is bad now. It could be SS board too. Are you experienced with the Panasonic repair . Thanks
Tags: None
kadleca

zbron

Join Date: Jan 2013

Posts: 4

Country: Czech republic
#2

08-27-2013, 10:13 AM

Re: Panasonic TX-P42C10Y

Hallo, it is solved . The SS board TXNSS1EQUE TNPA4774 wasbad too.
Comment

Previous template Next

Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen

by m1ch43lzm

Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-12-2025, 08:37 PM
Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock

by sam_sam_sam

I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

After all of...
- Channel: General Electronics Technical Discussion
07-13-2024, 08:14 PM
Panasonic TC-P54VT25 No image. A or D board?

by canadaboy25

I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
- Channel: Troubleshooting TVs and Video Sources
01-17-2021, 01:06 AM
ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap

by H34TO

Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-17-2025, 07:17 AM
Loading...
No more items.

Panasonic TX-P42C10Y

Panasonic TX-P42C10Y

Comment

Related Topics