Practical TV Repair Course UK

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • signup
    Senior Member
    • May 2013
    • 189
    • UK

    #1

    Practical TV Repair Course UK

    Hi

    This is a question for UK readers, is there a practical course for tv repairs in the UK.

    I have seen many a crash course for plumbers/plasterers/electricians etc etc but nothing for TV Repair.

    I come from a training background myself (Technical trainer for Major Motor Manufacturer) and know that 9/10 people who are prepared to pick up a screwdriver are whats is classed as a Kinesthetic learner, someone who needs to be shown hands-on as they will struggle to learn through audio or text.

    I am sure quite a few people would pay good money for such a course if anyone knows of one...or Tom66 is this something you would/could do?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Practical TV Repair Course UK

    I doubt I would ever have the time to teach such a course. I work 9-5 outside of uni, and have around 30 hours lectures a week.

    Basically I say if you want to try to fix something, risk it. It's worked well for me. If I can't fix something immediately from reading up on the problem, I often try to break the problem down into the individual parts and then I'm quite able to solve it. Hence why I'm quite often picking up odd/difficult TVs and new projects.

    It also helps to have an engineering background (Electronics in this case but any subject involving critical thinking, problem solving, etc is useful.)
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • signup
      Senior Member
      • May 2013
      • 189
      • UK

      #3
      Re: Practical TV Repair Course UK

      Originally posted by tom66
      I doubt I would ever have the time to teach such a course. I work 9-5 outside of uni, and have around 30 hours lectures a week.
      You need to work harder :o)


      Originally posted by tom66
      Basically I say if you want to try to fix something, risk it. It's worked well for me. If I can't fix something immediately from reading up on the problem, I often try to break the problem down into the individual parts and then I'm quite able to solve it. Hence why I'm quite often picking up odd/difficult TVs and new projects.

      It also helps to have an engineering background (Electronics in this case but any subject involving critical thinking, problem solving, etc is useful.)
      I do take risks with repairing and will have a crack at anything, obviously with my background I can follow schematics to a degree as I treat them like a wiring diagram of a car, but there a few things that get me.

      a:-different sections of the smps
      b:-tracing tracks/following tracks
      c:-Schoolboy Errors (When I was a technical trainer we use to drill it in to students to check battery voltage before you even think about testing and always get a wiring diagram, you would be amazed that after 3 years of training people would still not do this, we use to have fun by just disconnecting the lights earth and find an hour later the whole car was stripped down)...I still forget to do things I drilled into people everyday ie is there mains voltage and smoother voltage etc etc
      d:-I do have a friend who has been a tv engineer for 30 years and can get access to euras..two bad sides to this, reading a database doesnt help improve your fault finding skills and I would ask him to give me practical training but as you can imagine 30years very long in the tooth,and comments like if I need to use a scope I am not making money...his motto is if he cant find it with his fluke then its fooked :o)

      If you do have a career change or change of direction Tom give us a shout I will gladly be your first student

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Practical TV Repair Course UK

        If you can make your way to Leeds I can help fix the odd one, but I certainly can't teach a course. The main issue is I would never have enough time. And I'm pretty sure I'm going to be an electronics design engineer no matter what, not a TV repair guy.

        signup, if you have access to a service network this could be useful as I could upload service manuals from it?
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • signup
          Senior Member
          • May 2013
          • 189
          • UK

          #5
          Re: Practical TV Repair Course UK

          Originally posted by tom66
          If you can make your way to Leeds I can help fix the odd one, but I certainly can't teach a course. The main issue is I would never have enough time. And I'm pretty sure I'm going to be an electronics design engineer no matter what, not a TV repair guy.
          I will take you up on that offer, I am only 60 miles away from you, I will pm you in a couple of weeks.

          Originally posted by tom66
          signup, if you have access to a service network this could be useful as I could upload service manuals from it?
          I dont have direct access to Euras I believe my tv repair mate pays about £17pm for Euras and if you didnt know its run by CHS, I must admit what I have seen of it is a brilliant database, some samsung models have over 100 faults, but like mentioned looking at a database to be told that R812 is open sorts the fitters from the engineers and doesnt really teach you anything about fault finding

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Practical TV Repair Course UK

            Yes, I checked it out, £17/month isn't too bad, but I have to be a registered service shop -- I'm not, and running an actual business (rather than a hobby or second <£500/month income) from my property would mess up a lot of insurance & landlord things (can't run a business from the property.)

            I'm in Leeds in about a week or two's time for a few days, but I'm moving in proper in about 6~7 weeks time. Will be over the weekend. Let me know whenever you've got free time.
            Last edited by tom66; 07-12-2013, 06:53 PM.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • popeye
              Senior Member
              • May 2011
              • 155

              #7
              Re: Practical TV Repair Course UK

              Hi

              I can not help you with teaching but this is my story back in 1989 I was in your position I was also out of work so I went and signed on for a city and guides coarce at that time you could do 3 nights or one full day a week at the end of every coarce you took your tests if a pass was awarded you carride on with the next coarce part two and so on a total of four years in the mean time I took on part time work for a company where I was taught a lot I also took on my own repairs if I could not sort it then I got it repaired trade price then added a bit for my self I now only do want I want repair wise as I am retired mainly I repair laptops to componant level Television sets and consols etc.
              The best place to find out what is available is the main colledge or library in your town you should be able to access the sites from home. learning by doing it while getting your qualifications is best way just text boks an lectures will not teach you everything. good luck with what you do.

              Comment

              Related Topics

              Collapse

              • blues_spirit
                practical courses for troubleshooting pc motherboards
                by blues_spirit
                Hello from France,
                mon2 kindly advised me to post a thread to ask the question(s) I'm concerned about. I'm new to the forum and I'm looking for practical courses for troubleshooting pc motherboards especially laptops in Europe, if possible in France. I have been a computer network system administrator and a corrector of administration modules for automated programs under Unix. But I really miss the practical "ops" side of troubleshooting. So I would like to start from the beginning: 1.8V, 3.3V, 5V and 19V tests for example, etc...
                Do you think this is feasible for me? I...
                12-18-2022, 12:56 PM
              • AJ847.63e
                Testing ATX PSUs under load - Does loading the ATX 24 pin also load EPS & PCIE?
                by AJ847.63e
                Hi Folks,

                Just wanted to clear up a misunderstanding of mine (or what I expect is one). Isn't the 12V rail from the 24 pin, EPS and PCIE separated? IE if I put a power resistor on the ATX 12V pin that is not going to load, thus tell me if the EPS or PCIE rails are fine?

                I was recently watching ArIs from Hardware Busters video on how to properly test ATX PSUs without using 5 figure Croma substations.

                The PCB adapter he used breaks out the 12, 5 and 3.3V pins from the 24 pin and gives you banana plugs to connect to. That is a bit useless is it not? Aren't...
                05-06-2025, 10:37 PM
              • Foetuss
                Recap motherboards :: Abit KG7-LITE and Soltek SL-75FRN2-L
                by Foetuss
                Hi all

                Hope this is in the correct place.

                I'm planning on recapping both motherboards. I actually already ordered recplament caps for them, where I will be changing out most for poly's.
                Could use some double checking to see if I'm not doing something stupid .

                Pictures of the boards are attached.
                What I will be replacing with what : (planned)

                Soltek Golden ::
                4 1500µF 16V 10mm (5mmL) KZG => APSG160ELL152MJ16S (Chemi-Con 1500µF 16V)
                6 3300µF 6.3V 10mm (5mmL) KZG => APSG160ELL272MJ20S (Chemi-Con 2700µF 16V)...
                01-18-2025, 11:44 AM
              • ronnygracias
                Help with freemotion incline trainer with controller comm error
                by ronnygracias
                The treadmill was working fine, one day the belt snapped and after checking the unit I also noticed that the display is now showing the Controller comm error. So I opened it up and the treadmill had two boards. One is a power supply board and the other is the motor controller. I noticed there was a mouse nest, so I took power supply board out, cleaned it up, replaced the big capacitor and that did nothing. Then I took apart the motor controller and cleaned that up, and when I plugged it in, it started right up. I thought I fixed it. But when the belt arrived, I installed it and tried to power...
                11-04-2024, 01:32 PM
              • Macroman
                Garmin dog training collar.ID help with SMD, Please?
                by Macroman
                I have several boards like this from my buddy...The boards are out of training collars for hunting dogs. Powered by 3.6V Li-ion, 2750mAh, 9.9Wh battery. This components are related to the audible tone and shock functions of these collars... and all have these same SMD components that are bad. All the boards have 2 of these (as shown in the 2nd image) and the related functions of the units are non-working on the boards with the damaged SMD's. They have only C on them.


                Does anyone here know how to find out what this component is and where to get it.. if it is available??
                ...
                08-18-2022, 03:20 PM
              • Loading...
              • No more items.
              Working...