Olevia 242-s11 rebuild

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Twithers
    Senior Member
    • May 2013
    • 69
    • U. S.
    #1

    Olevia 242-s11 rebuild

    I picked up this Olevia 242-S11 (P/N: FM1-042000ES001) from a guy who was trying to repair it. He bought some replacement boards, but his wife waned it out of the house before he could finish it.

    I've done some plasma repairs, but this will be my first LCD.

    I've got pictures of the whole unit, left side and right side.

    Can anyone push me in the right direction? Once I have ll parts in their proper place, I'll fire it up and attach a picture of the screen.

    Thanks.
    Attached Files
    Tags: None
    • Twithers
      Senior Member
      • May 2013
      • 69
      • U. S.
      #2
      Re: Olevia 242-s11 rebuild

      Also, I found the user manual for this set, but if anyone has access to the service manual, that would be very helpful.

      I have already tried the tgo, eservice, and that portuguese sites with no luck.

        Comment

        • Twithers
          Senior Member
          • May 2013
          • 69
          • U. S.
          #3
          Re: Olevia 242-s11 rebuild

          I got it all together and it works great.

          I love it when a plan comes together!!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • flibidy
              Magnum IA.100 Amplifier Switches on, No Output, Possible Input Side fault?
              by flibidy
              I have here a Magnum IA.100 which belongs to my parents.



              The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.


              Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.


              What Ive done........
              Magnum IA.100 Front
              8 Photos
              01-01-2025, 01:26 PM
            • bouny56
              Lenovo E15 Nm-c421 usb-c work only in one side
              by bouny56
              ​Hello

              Laptop E15 I5 10gen
              Mb nm-c421

              I have a problem with the usb-c power dc.
              The motherboard start only in one side of the usb-c

              Replace the usb-c port 2 times same problem

              With the usb-c meter, one side 20v ok, other side the usb-c meter don't come on

              Try to test the pin with the Mechanic Tail insertion tester and every pin are ok ?

              Can the pd controler be the fault ? Or something else maybe ?

              Thx

              ...
              02-11-2025, 03:15 AM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • Stephen
              A2442 MacBook Pro 14" Two Left SIDE USB C ports charge but no data
              by Stephen
              Right SIDE usb.c port charges and transfers data without issue, two left side uSB c ports charge but do not receive or see data. Was liquid damaged, and repaired significantly and thought we were in the clear but appears this is the last issue that is rearing its head. I am trying to locate the RETIMER chip that communicates the DATA TX/RX but I cannot seem to find it on the schematic or maybe I am just so tired my eyes wore out lol. Any help would be great.
              05-29-2025, 10:35 AM
            • dicky96
              Xilence XP600 600w ATX PSU - No PWM Controller on primary side - how does it work?
              by dicky96
              Hi guys
              I have a faulty Xilence ATX PSU here

              The fault basically is I have two short circuit power transistors on the primary side of the large SMPS transformer - they are 2SC3320.

              There is another smaller transistor on the primary side C3866 which tests ok

              The PSU has three transformers - it looks like the 2SC3320's drive the big one and the C3866 drives one of the small ones. There is a separate PFC PCB with it's own controller and MoSFETS

              There is also a short on the 3.3V output and a near short on 5V - I suspect this probably blew...
              05-11-2021, 07:55 AM
            • Loading...
            • No more items.
            Working...