Not as lucky as I'd hoped, Westinghouse LD-4255VX

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • johnboy1313
    Badcaps Legend
    • Nov 2012
    • 1959
    • USA
    #21
    Re: Not as lucky as I'd hoped, Westinghouse LD-4255VX

    Looks like I dropped the ball on getting that T-con picture. At any rate, I found a cheap mainboard on eBay. The set is working now. The sound on this thing sucks. My cell phone has better audio.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK
        #22
        Re: Not as lucky as I'd hoped, Westinghouse LD-4255VX

        Glad to hear. Most LED TV's sound sucks, they are way too thin.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • zesko
            xps 9520 ribbon cable
            by zesko
            Hello,
            I have a XPS 9520 with broken daughter board and missing ribbon cable. I can fix the board by replacing the connector, but I can't find the correct ribbon.

            There is 2 models, idk which one is needed on my laptop.

            0xkvng
            00vpr2

            Daughter board is LS H822P. When I check for a palmrest, the board attached to have a 0xkvng ribbon. But when I check for LS h822p, it's 00vpr2 ribbon...

            Someone can help me with that please ? Idk the difference between these 2 ribbon but they definitely doesn't look the same..

            thanks...
            10-23-2025, 05:03 PM
          • Tr0ll
            T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
            by Tr0ll
            Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

            The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

            Original T-con:
            Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

            First replacement T-con:

            I thought it might be t-con and ordered new t-con from china(supposedly tested)...
            10-07-2023, 07:48 PM
          • Rubenlily
            Quick question about the ribbon
            by Rubenlily
            Hey,

            So I have horizontal lines on my TV and I'm trying to trouble shoot. My question about the ribbon is:

            When I disconnect one ribbon from the t-con I should get half picture working and other half black or something like that correct? But when I disconnect the ribbon on one side I just get a dark screen and it doesn't matter what side I disconnect. I just get the dark screen. No half working, no one half black and the other one left. Sound is playing from the TV so it's obviously on and when both sides are connected I have the picture with the horizontal lines...
            08-17-2023, 11:09 AM
          • Scincidae
            UN70NU6900FXZA Won't Boot Unless I Temporarily Disconnect Right LVDS Ribbon
            by Scincidae
            I recently was given a UN70NU6900FXZA that would only boot loop once plugged in (auto powers on when plugged in). I found that disconnecting the lower (right side) LVDS ribbon, then plugging the TV in, followed by reconnecting the lower LVDS ribbon will allow the TV to work 100% normal as far as I can tell (no lines, no discoloration, no dimming or anything like that).

            I tried the tape method on the lower LVDS ribbon and found that if I cover pins 10 and 11 (counting from the bottom up) allows the TV to boot normal but 25% screen all the way to the right side is discolored. While...
            04-24-2022, 06:00 PM
          • kca
            50" LG tv with a slightly torn ribbon cable ~ Any repair method?
            by kca
            Hello all ~

            I have this LG 50" plasma tv that is in perfect working condition except for the fact that it has one (and only one), singular torn ribbon strip on one (and only one) of the 8 orange ribbon connectors that feed from the Y-Sustain to the screen itself.

            So, as a result, there is one, singular thin black horizontal line that goes across the entire screen. Distracting enough to render the picture unwatchable for all intents and purposes.

            What I am wondering is if anyone out there has ever had any success in fixing one of these ribbon cables...
            09-24-2020, 02:07 PM
          • Loading...
          • No more items.
          Working...