Sony KDL-40EX500 No Power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • drpj23
    Badcaps Veteran
    • May 2012
    • 528
    • USA

    #1

    Sony KDL-40EX500 No Power

    This sony seems to have no apparent power but does have 3.3v stby.
    On top of that there is 3.3v at BL_ER which I believe is signaling an error.

    I have already replaced the main but in no change in symptoms.

    I have read, as well, on here that this tv does have some inverter errors but there are no flashing lights or error diagnostic.

    I am just thinking i have a faulty main but I need a second opinion or test procedures.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Sony KDL-40EX500 No Power

    Cut the BL-ERR wire, use a ~100 ohm resistor to force it to ground, and see if the set then starts up with 2 seconds to black or if it powers on and stays on (bad bulb possibly, but it might have no lockout, so run it no longer than 30 seconds.)

    BL-ERR would be from the inverter to the main not the other way around IMO.
    Last edited by tom66; 05-20-2013, 06:17 PM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • drpj23
      Badcaps Veteran
      • May 2012
      • 528
      • USA

      #3
      Re: Sony KDL-40EX500 No Power

      I would think so too but if I would unplug the inverter the error is still there.

      Well I had a 400 series come in and thought I would swop the power supply and I suppose the power supply can also trip the BL_ER if something is wrong with itself because it works with the new power supply. Go fig.

      Comment

      Working...