panasonic tc42pc2

[banjobill1]

? SHOULD the F+15V FROM THE P BOARD BE THERE AT ALL TIME AFTER THE POWER IS SWITCH ON. I HAVE IT AT FIRST THEN WHEN THE RELAY CLICKS IT GOES AWAY. THANKS.

[tom66]

Re: panasonic tc42pc2

What's the fault with the set?
F+15V is switched I believe; it shouldn't continuously be present.

[banjobill1]

Re: panasonic tc42pc2

I get a 10 blink. After power up. Thank you

[tom66]

Re: panasonic tc42pc2

10 blinks can also be A board.
If F+15V is good on relay click the PSU's probably good.
There are other supplies on the A board (9V, 3.3V, tuner (30V) etc.) These can also cause 10 blink error.

[tw2005]

Re: panasonic tc42pc2

For info.

[tom66]

Re: panasonic tc42pc2

tw2005, where is that from? Can you send me a copy to upload to the service manuals site?

[tw2005]

Re: panasonic tc42pc2

tw2005, where is that from? Can you send me a copy to upload to the service manuals site?

panasonic_tc-p42s2_s2-series_13th-generation_2010_tech-guide_training

Not an exact match for this model always handy for reference.

[banjobill1]

Re: panasonic tc42pc2

Thank you all