JDV LCD has vertical lines

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • playman
    Badcaps Veteran
    • Jan 2011
    • 252
    #1

    JDV LCD has vertical lines

    Hello.
    Does any one know what causes this simpton?
    It started with one line then started to get worse over time.

    Is there a possibility to fix it?
    Attached Files
    Tags: None
    • playman
      Badcaps Veteran
      • Jan 2011
      • 252
      #2
      Re: JDV LCD has vertical lines

      Just noticed that I forgot to write the model.
      TV Model: LC - 32m5s

      I can't seem to be able to find how to edit the thread name, so this just has to do.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: JDV LCD has vertical lines

          The LCD panel is defective and it's unlikely this will be repairable.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • playman
              Badcaps Veteran
              • Jan 2011
              • 252
              #4
              Re: JDV LCD has vertical lines

              Thanks for the reply Tom66.
              Do you know what can cause this, and what happens when this happens?

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: JDV LCD has vertical lines

                  It's probably due to water or moisture in the screen. Either that, or the layers are de-laminating due to heat. My friend has a similar issue with a 32", but it's only one line.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Stanley1843
                      Screen Display Vertical Multicolor Lines
                      by Stanley1843
                      Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                      06-29-2024, 11:54 AM
                    • gpo23
                      Sony KDL-40V3000 - Vertical lines
                      by gpo23
                      Hello,

                      i order a t-con because i had bad colors on my SONY KDL-40V3000 :




                      With the new t-con the color are good but there are vertical lines on all the screen :




                      I've tried the old t-con and it returned to the initial issue (bad colors but no vertical lines)

                      Is there a way to fix the vertical lines on the new t-con ?

                      Thank you for your help

                      gpo23...
                      10-04-2023, 09:11 AM
                    • Firentiosi
                      1/3rd of screen black with occasional vertical lines - repair attempt for learning! - Kogan KALED58RT9220SVA
                      by Firentiosi
                      Thanks for offering your assistance with this. I'm an electronics enthusiast with moderate level of competence (have a decent lab with two power supplies, microscope, DSO, hot air, good iron, can competently work at a component level on SMDs, design and solder own PCBs etc). I really enjoying fixing things and learning new stuff so took up a free 58" LED TV and have been googling and watching Youtube videos to see if I can fix this! I am happy to go down to individual component replacement/strip replacement etc - it's all in the name of learning.

                      The issues are as follows: the...
                      2 Photos
                      11-27-2024, 12:33 AM
                    • viking509
                      vizio e65 e3 LED tv color vertical lines center tv only
                      by viking509
                      I recently replaced the led backlights with LB65041 LED Backlight Strips and after putting it back together the backlights work but there are only colored vertical lines only in the center of the tv. I can see the Netflix logo (jumbled) after a minute or less the screen went dark. When I turned it on again the lines were back. Then I replaced the t-con board but the same vertical lines in the picture. My question is what is my next step? Could it be a source tab bond issue? A buffer board issue? Could I have loosened a connection to the panel when replacing the backlights? Should I replace the...
                      03-21-2023, 12:48 AM
                    • rfxcasey
                      Vertical Lines on Half of LCD Display
                      by rfxcasey
                      I have an Siemens HMI with vertical lines on half of the screen. These lines aren't scrambled garbage but rather very regular in pattern and color. I have replaced the LCD with a new one and still the problem persists. I'm wondering if this isn't indicative of a bad video process chip or video memory? Any help would be appreciated. The cable appears to be OK but one pin on the header is unpopulated, though there isn't any loose wire to suggest one broke off or popped out of the connector. In the picture below where the connector is busted out of the side, I did that with my small screw driver...
                      05-16-2024, 06:52 AM
                    • Loading...
                    • No more items.
                    Working...