Need photos for Akai PDP4216M

[troxel]

Got an Akai televsion that was taken apart and given to me. I am trying to reassemble the unit, but wondering if anyone has some photos of the inside particularly the connectors coming off the power unit. This was in a lot of 5 tvs, and trying to sort out where all the pieces and connectors go.

Thanks!

[drpj23]

Re: Need photos for Akai PDP4216M

This looks to be an LG PDP so there are probably variants to how the TV was built/assembled.
Just be sure the parts work with the panel and you should be fine.

[tom66]

Re: Need photos for Akai PDP4216M

SM may help: http://www.tgohome.com/ServiceManual...&Search=Submit

[troxel]

Re: Need photos for Akai PDP4216M

Thanks for the help. I forgot to mention that I downloaded the service manual, and was using that as a guide. The problem that I am running into is I have 3 main (video)&tuner/audio boards, and each one has a different connector/housing on the pcb. I have a few empty connectors and don't know if that is by design or not.

I did find a spliced connector (photo 4) and not sure where that should go. The other end goes to the two connectors in (photo 5).

I have attached some photos and wondering if anyone can help fill in the missing pieces.

Thanks again!

[tom66]

Re: Need photos for Akai PDP4216M

2nd pic might be designed for another plasma panel. The other looks like it will only affect audio - so perhaps see if it works for a picture without them connected...