Vizio power supply DPS-284BP

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jmontes
    New Member
    • Jan 2013
    • 2
    • Mexico
    #1

    Vizio power supply DPS-284BP

    Hi,

    My power supply DPS-284BP of my vizio tv has the filter oscilator capacitor (C815) got so damage that I can't see its value and I have beeing looking for it to remplace it.

    Does anyone has a diagram that indicates its value or the power supply itself so it could told me the value? Or any recommendation what capacitor value should I put?

    Thanks
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: Vizio power supply DPS-284BP

      Is this the one you have?
      http://www.shopjimmy.com/vizio-0500-...wer-supply.htm

      Upload the Closed up pictures of the cap?
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • jmontes
          New Member
          • Jan 2013
          • 2
          • Mexico
          #3
          Re: Vizio power supply DPS-284BP

          Yes it is, the capacitor is below the left aluminium cover, and in the board is marked as C815

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Vizio power supply DPS-284BP

              Can you show us a picture of the damaged one?
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • sam_sam_sam
                  Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                  by sam_sam_sam
                  I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                  I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                  07-01-2024, 06:34 AM
                • JimBanville
                  Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                  by JimBanville
                  The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                  Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                  I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                  I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                  09-13-2023, 07:21 AM
                • CMCM
                  Russound CA4 Power Supply Repair
                  by CMCM
                  Hello Everybody,

                  Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)

                  Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).

                  The outputs marked 12v and 20v are all measuring only 1v.

                  The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.

                  The capacitors physically look clean (no bludgesor leaks) and...
                  07-03-2025, 01:12 PM
                • Loading...
                • No more items.
                Working...