Announcement

Collapse
No announcement yet.

Samsung 55" lcd ln66c630 no backlight

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung 55" lcd ln66c630 no backlight

    Was watching tv, heard a small pop and picture went out while sound still works. Ordered and replaced inverter board but still have the same issue. Given the pop sound is it likely that one of the ccfl bulbs is bad and causing the entire issue? I have no light at all from the tv other than the power lcd light. Thought of trying a new tcon board but not sure. All caps look good and still have power/sound so thing the main board should be good to go.

    I know getting to the ccfl's is not going to be easy so wanted to get opinions before starting that. Tcon board would be easy but the pop then no picture makes me wonder if that is even the issue.

    #2
    Re: Samsung 55" lcd ln66c630 no backlight

    Can you please verify the model number?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: Samsung 55" lcd ln66c630 no backlight

      Model is LN55C630K1F. Sorry about that.

      Comment


        #4
        Re: Samsung 55" lcd ln55C630 no backlight

        This is the correct model #

        Comment


          #5
          Re: Samsung 55" lcd ln66c630 no backlight

          OK, your TV uses power supply-inverter board and balancer board that gets the High Voltage outputs from the Power supply-inverter board and get distributed to each lamps.
          If one of the lamp is bad you still should see the backlights flash on for seconds before the inverter goes into shutdown due to bad lamp (the inverter will fire up the lamps first, if it detect too much current flowing in any one of the lamp the little lamp current sensing transformers on the balancer board will send the feedback signal to tell the inverter to go into shutdown, or if it detects that after the lamps are fired up but one or more lamp did not stay on, it will also go into shutdown. The detection will detect the problem in the first 3 seconds to make sure all are OK for the inverter to stay on.
          So look real close at the screen in the dark room to see if the lamps flash at all first.
          Last edited by budm; 01-05-2013, 01:39 AM.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment


            #6
            Re: Samsung 55" lcd ln66c630 no backlight

            Thanks! Tried that and the screen stays completely black. Back cover is off so tried also looking for some sign of light from the back of the unit and nothing there either. Does this point us in any sort of direction?

            Comment


              #7
              Re: Samsung 55" lcd ln66c630 no backlight

              That means the Inverter circuits ddi not even try to run.
              So next thing we need are really GOOD CLEAR FOCUSED pictures of the back side of the TV so we can see how all the boards are connected together, and then good pictures of the power supply board.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment


                #8
                Re: Samsung 55" lcd ln66c630 no backlight

                I too am have this same issue with this model. replaced the inverter with no change. I read that c1818 on the power supply board had been the fix for others with this problem. but upon inspection found the location for c1818 but no capacitor.

                Comment

                Working...
                X