Pioneer pro1000HD no picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dsnyder586
    Member
    • Dec 2012
    • 39
    • United States
    #1

    Pioneer pro1000HD no picture

    Just picked this one up- won't turn on, clicks and shut off.

    I unplugged the y-buffer from the Ysus board and viola- the bottom half lit up, and I can see the menu etc.

    NOW- I cannot find the board number for the Y-buffer, or how to remove it (it is housed in an aluminum frame)

    Help!
    Tags: None
    • dsnyder586
      Member
      • Dec 2012
      • 39
      • United States
      #2
      Re: Pioneer pro1000HD no picture

      NVM- The y-buffer boards are non-serviceable.... I will part this one out.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: Pioneer pro1000HD no picture

          Are you sure?
          Bonded to the panel on this model? (very early NEC plasmas used bonded to panel buffers.)
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • dsnyder586
              Member
              • Dec 2012
              • 39
              • United States
              #4
              Re: Pioneer pro1000HD no picture

              Yep- bonded tot he board UGH. I'll have to figure out how to recoup my loss on this one, lesson learned.

              I think I am going to stick to one or two brands and year ranges to keep it simple.

              (Samsung/Toshiba 2008-2012)

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: Pioneer pro1000HD no picture

                  Panasonic produce the best plasma displays (IMO) and LG produce some very good ones in the 50"+ category, they've got a few issues with inferior capacitors though...
                  Samsung plasma displays get a thumbs down from me. Far too many failures.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • dsnyder586
                      Member
                      • Dec 2012
                      • 39
                      • United States
                      #6
                      Re: Pioneer pro1000HD no picture

                      Duly noted-

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Tr0ll
                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                          by Tr0ll
                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                          Original T-con:
                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                          First replacement T-con:

                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                          10-07-2023, 07:48 PM
                        • JJAAMM
                          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                          by JJAAMM
                          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                          Problem
                          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                          07-06-2023, 06:01 AM
                        • TR103
                          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                          by TR103
                          Hi, I have a Samsung UE50TU with:
                          - sound and backlight, but no picture
                          - when it arrived, it had a picture for a few seconds
                          - it keeps rebooting
                          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                          - without cable between mainboard and lcd panel and with a jumpered...
                          01-22-2025, 04:12 PM
                        • PowerAmpFreak
                          Pioneer Kuro KRP-500 picture turns black
                          by PowerAmpFreak
                          This Pioneer Kuro KRP-500 plasma display has an intermittent issue in that it the picture turns black suddenly.
                          Sound works all the time.
                          Powerled is on all the time.
                          This set has a separate control box which for a few years had a similair problem which was fixed by replacing a number of voltage regulators.
                          Quite a common issue as fas as I know.
                          Question is: are there more of the notorius voltage regulators also inside the display unit which should be replaced?
                          Other advice?
                          There are not a common cause which makes the issue. Can work for two days,...
                          03-26-2022, 04:41 PM
                        • Mgiffune
                          Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                          by Mgiffune
                          I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                          I ordered a supposedly ‘new' Tcon board this time, and                          ...
                          06-09-2024, 10:28 AM
                        • Loading...
                        • No more items.
                        Working...