I found a 42PC5D locally. No picture, just sound. The owner says there is no flicker, there is nothing at all in regards to the screen. I have fixed 4 of 5 LCD TVs and diagnosed the 5th as being too expensive to fix. I have never worked on a Plasma but I'm not intimidated by it. If I can get it for $30 should I? Thanks
LG 42PC5D, No picture just sound. $30 yes or no?
Collapse
X
-
Tags: None
-
Re: LG 42PC5D, No picture just sound. $30 yes or no?
You probably wont get much for it in resale (due to it being an older plasma and a 720 set) but if you want to get familiar with plasmas and try to understand the operation of the set then sure.
You probably have a problem with the hybrid in the Y sustain. -
Re: LG 42PC5D, No picture just sound. $30 yes or no?
That's what I've read. I'm not even sure what a hybrid is. Any chance someone could post a pic?Comment
-
Re: LG 42PC5D, No picture just sound. $30 yes or no?
Here check this out.
http://blog.coppelltvrepair.com/search?q=42pc5dComment
-
Re: LG 42PC5D, No picture just sound. $30 yes or no?
These also have sparklies bugs (needs firmware update -- difficult to do), but $30 is cheap, so may be worth it.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
Related Topics
Collapse
-
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
by IerwinHello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
by jchangHi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon... -
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...-
Channel: General Computer & Tech Discussion
-
- Loading...
- No more items.
Comment