sharp lc-c5255u only blink codes no picture

[Callamity]

Re: sharp lc-c5255u only blink codes no picture

Try this to see if you can force on the power supply, unplug it from the wall outlet then

Hold [CH_DOWN] and [VOL_UP] on TV, plug in the AC power cord while holding both buttons in.

Above was taken from "just answer"

Try at your own risk though as you will be forcing the psu to switch on.

I have this same model TV, a Sharp LC-C5255U. A lady in the neighborhood was giving it away for free to anybody that wanted to see if they could fix it so I grabbed it. Steady 1 Hz flashing green light. I can do the Channel Down and VOL + and turn on the TV or plug in the TV and I get the screen to light up for about 1 second before going dark again. No clicking or anything. I'm wondering if it is just a bad PSU. The other option I was able to track down was it may be a bad LED display, but since the screen lights up (in some manner) I'm wondering if that means it is OK, or since it is just a quick on/off, if the LED display is bad? Any ideas?

[peter1987 djuh]

Re: sharp lc-c5255u only blink codes no picture

i tried channel down +vol up, the led remained steadily green but black screen

[peter1987 djuh]

Re: sharp lc-c5255u only blink codes no picture

i have a sharp lc-52d78un with power leds blinking. so am stock any help will be greatly appreciated

[G_WaTT]

Re: sharp lc-c5255u only blink codes no picture

I had the same issue (2-5 error) and I did the "Channel Down & Volume Up," reset and now my light no longer flashes. It just stays on and it doesn't appear that the backlight is coming on. Any thoughts or ideas before I crack this baby open and start disconnecting ribbon cables?

[bigdotbob]

Re: sharp lc-c5255u only blink codes no picture

Also when the PSU comes on you get a relay click. When I turn the unit off I get a louder relay click.

[bigdotbob]

Re: sharp lc-c5255u only blink codes no picture

I am new here and have the same TV as mentioned. Mine gives no error codes and only has a solid green led when the power button is pressed. Just a black screen. Tried the force power on with same result. Any ideas.

[37PF7320A/37]

Re: sharp lc-c5255u only blink codes no picture

I just repaired this LCD tv exact same model.
symptoms- when the tv turns on, all I get is a black screen with blinking green light. No other error codes. It was crazy frustrating trouble shooting this. I measured the transformers on the master and slave inverter board with a multi meter. The resistance should be 1.31 k ohms. All but one measured within the specs except one. I get an OL reading. Note I did my measurement with the tv powered off. I set my multi meter on the ohms scale. I took a chance to order this part on eBay for 13 dollars. After soldering it, the resistance for all of the transformers were back to specs. The tv powered on and stayed on. Works good as new. If anyone has the this similar issue I would advice testing the mini transformers on your master and slave inverter board. My email is normanw1@yahoo.com for help.

lcc5255u aquos fixed
lcc5255u aquos resolved

Note, it was very very very challenging troubleshooting this problem because I didn't get any other error codes except the blinking green light. There wer no visual signs of bulging capacitors, or melted resistors. I read so many things on the main board, power supply board, cfls and inverters could go bad. Also with this tv if there are any problems with any parts of the components , the tv goes into standby mode.

[Cogtx]

Re: sharp lc-c5255u only blink codes no picture

2 power, 5 opc led blink code is an error in the 12 volt panel power. A broken and shorted screen is a frequent cause of this error. If the LCD screen is OK, it can be a short on the t-con board as well. In this case, the rest of the boards are likely to be OK.

(2 long, 5 short also means the same thing)

Thanks for the input and info. Gotta decide what to do with the unit now..

[Alohamora]

Re: sharp lc-c5255u only blink codes no picture

Probably been damaged somehow, but there's another fault as it's giving a 5 and 2 blink code. As it lights up, PSU and inverter and probably OK, and the main and T-con are suspect.

2 power, 5 opc led blink code is an error in the 12 volt panel power. A broken and shorted screen is a frequent cause of this error. If the LCD screen is OK, it can be a short on the t-con board as well. In this case, the rest of the boards are likely to be OK.

(2 long, 5 short also means the same thing)

[Alohamora]

Re: sharp lc-c5255u only blink codes no picture

Thanks for all of your assistance. I needed to know if the LCD screen was damaged anyway before investing anymore time/money into this project. I really appreciate your quick replies and help. Do you have any idea about the fuse like parts in the picture? Just curious....

Yes those are configuration jumpers. Inserting the jumper opens up a set of contacts.

[tom66]

Re: sharp lc-c5255u only blink codes no picture

Can't get menu or anything else to come up on the screen

It could simply be because the LCD is so damaged you can't see anything, try the input button and see if you can get a video from an external source (like a DVD player.)

[Cogtx]

Re: sharp lc-c5255u only blink codes no picture

That thing looks to be have been hit, not dropped. Probably another Wii controller!

Can you get a menu or interface up on the LCD at all?

Can't get menu or anything else to come up on the screen

[tom66]

Re: sharp lc-c5255u only blink codes no picture

I always thought you could tell if the screen was smashed?

Nope. It's not always visible without a backlight, even under torch. Samsung LCDs tend to show it clearly, whereas LG-Philips don't.

[gilly1984]

Re: sharp lc-c5255u only blink codes no picture

I always thought you could tell if the screen was smashed?

If not by naked eye then by torch or camera flash.?

I was so happy when my recent collection showed a screen, thought i had been done too.

[tom66]

Re: sharp lc-c5255u only blink codes no picture

That thing looks to be have been hit, not dropped. Probably another Wii controller!

Can you get a menu or interface up on the LCD at all?

[Cogtx]

Re: sharp lc-c5255u only blink codes no picture

You get bitten by some people selling broken TVs, though I've only been ripped off once by someone who knew the screen was cracked (he pulled a fuse out on the power supply so it didn't light up.)

Oh, just have to post a shot of the screen after I followed your advice...pretty colors!

[tom66]

Re: sharp lc-c5255u only blink codes no picture

You get bitten by some people selling broken TVs, though I've only been ripped off once by someone who knew the screen was cracked (he pulled a fuse out on the power supply so it didn't light up.)

[Cogtx]

Re: sharp lc-c5255u only blink codes no picture

I'll ask my son to talk with neighbor and find out (they live 200 miles away from me). Guess I will have to find someone who needs some parts for their sharp TV now...oh, well..live and learn

[tom66]

Re: sharp lc-c5255u only blink codes no picture

No solid idea myself - perhaps option jumpers or settings for models?

Did you ask the neighbour what happened when it failed?

Maybe it fell and this broke a CCFL tube, hence the error code and cracked screen?

[Cogtx]

Re: sharp lc-c5255u only blink codes no picture

Probably been damaged somehow, but there's another fault as it's giving a 5 and 2 blink code. As it lights up, PSU and inverter and probably OK, and the main and T-con are suspect.

Thanks for all of your assistance. I needed to know if the LCD screen was damaged anyway before investing anymore time/money into this project. I really appreciate your quick replies and help. Do you have any idea about the fuse like parts in the picture? Just curious....