SANYO 42" LCD 1080p 60Hz HDTV,DP42841

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6039
    • USA
    #1

    SANYO 42" LCD 1080p 60Hz HDTV,DP42841

    Can any tell me how good this set is

    I am thinking about buy one that is new and in the box



    Or a good brand for the ( money $ 400.00 to 450.00 a 39 " to 42 " ) my wife is asking this question
    Last edited by sam_sam_sam; 10-13-2012, 04:03 PM.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: SANYO 42" LCD 1080p 60Hz HDTV,DP42841

      If you are looking for TV advice, may I suggest AVSForum?

      DO NOT get a 39 inch. These are crappy LCD panels made by an as-yet unknown manufacturer. (40 inch are possibly AUO/Samsung, but 39 inch are definitely not.)

      A few failures of Sanyo products, but in general they seem to be well made. Make sure it's a genuine Sanyo (not a rebadged piece of junk.)
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • sam_sam_sam
          Badcaps Legend
          • Jul 2011
          • 6039
          • USA
          #3
          Re: SANYO 42" LCD 1080p 60Hz HDTV,DP42841

          Thanks for the info

            Comment

            Previous template Next

            Related Topics

            Collapse
            • cj_reha
              Mystery 80s Sanyo cap - perhaps polymer?
              by cj_reha
              Hey all I've been working on a 1984 Sanyo 27" color TV which had a smattering of bad caps in the video switching circuit. I found this oddball little 1uF 25V cap which looks to me like an early polymer, but I can't find concrete info proving it. I know Sanyo was a big player in early polymer cap development and this is the time period where they were just getting on the market, so I'm wondering if anyone has crusty old datasheets that could help identify it and determine if my suspicions are right? It has the same epoxy end seal and font/formatting as some old stock Os-Cons I've got laying...
              01-06-2023, 09:24 AM
            • toddw65
              Sanyo DP5834 - Gray Screen
              by toddw65
              Hey All,

              I have a Sanyo DP5834 that did have an issue with the backlights, but I disassembled the unit and repaired the LED strips by resoldering all of the connectors. Now I've reassembled it and I have backlights and sound, but a grayish screen. I can tap on the screen and see that it's on, but no picture. All voltages seem to be correct on the power board.

              Based on the LCD Flat panel TV troubleshooting guide by Bud Martin, I'm thinking the T-Con has failed because I'm getting 12v both into and out of FP1 on the T-Con. Am I on the right track?

              Thanks,...
              5 Photos
              10-31-2024, 10:37 AM
            • Zilicon
              Evoo gaming laptop EG-LP10-BK not displaying with 1080p screen but it displays with
              by Zilicon
              Please help:

              The above laptop with the board number: "GK5MP5X MB V1.0" started with the screen becoming blank when a game was launched, or a higher definition video was being played. It became worse by not displaying at all during boot up, but there are signs that the PC was working every other thing worked except the display.

              The PC works normally with HD screen (720p) but no display with a full HD screen (1080p)

              I couldn't find any boardview or the schematics for the motherboard.

              Please, how do I solve this problem
              02-13-2024, 03:43 AM
            • hugocarmo
              Sanyo VHR-D4710G VCR no sound.
              by hugocarmo
              Hi again guys.
              Today I have a problem with this Sanyo VCR.
              I bought it online, It worked sometimes.
              I recap the Power supply and it started working fine.
              Image is perfect and all digital effects too.
              All of a sudden it stopped outputting sound. I checked for dried solders an all boards and soldered when needed, no fix.
              I have no sound on playback, on tuner, or aux in.
              On symptom I noticed is when it was working fine, the HI-FI led was on when I power up the VCR, now is OFF, A-B leds are on but when I put a tape they go off.
              On one of the sound processing...
              01-23-2024, 12:58 PM
            • Chiro
              DIGMA PRO Art M Monitor 5K IPS 60hz only backlight
              by Chiro
              Hello everyone,

              The monitor has no visible external damage and has not been dropped. Currently, the backlight is on, but no image is displayed. I have replaced the power and HDMI cables, and connected it to my laptop (the graphics card detects the monitor, but no image appears). The service menu is also unresponsive. Could anyone share insights on troubleshooting or repair options for this issue?
              07-06-2025, 02:21 PM
            • Loading...
            • No more items.
            Working...