Philips LCD 42" TV Help needed

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • hucklebuck73
    Member
    • Sep 2012
    • 22
    • U.S.A.
    #21
    Re: Philips LCD 42" TV Help needed

    Huh I dont understand I posted them and saw them before i logged off last time...Not sure where they went.


    i used the is that not how it works here?

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271
        #22
        Re: Philips LCD 42" TV Help needed

        Originally posted by hucklebuck73
        i used the is that not how it works here?
        Follow my instructions below exactly on how to post pictures.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

          Comment

          • hucklebuck73
            Member
            • Sep 2012
            • 22
            • U.S.A.
            #23
            Re: Philips LCD 42" TV Help needed

            Sorry but i thought they were clear, so i am looking for the manage attachments button? So do i just host them on this site somewhere?

              Comment

              • hucklebuck73
                Member
                • Sep 2012
                • 22
                • U.S.A.
                #24
                Re: Philips LCD 42" TV Help needed

                do you mean the attachments tab under usercp?? Please help so I can post pix the "right" way and get some help.

                  Comment

                  • Mr Bill
                    Badcaps Veteran
                    • Nov 2011
                    • 648
                    • USA
                    #25
                    Re: Philips LCD 42" TV Help needed

                    Just make sure it's within 2000 x 2000. I use windows paint to shrink/crop images.
                    Attached Files

                    if you find these attachements useful please consider making a small donation to the site

                      Comment

                      • hucklebuck73
                        Member
                        • Sep 2012
                        • 22
                        • U.S.A.
                        #26
                        Re: Philips LCD 42" TV Help needed

                        awesome thank you so much i'll try it here now...

                          Comment

                          • hucklebuck73
                            Member
                            • Sep 2012
                            • 22
                            • U.S.A.
                            #27
                            Re: Philips LCD 42" TV Help needed

                            hope this worked
                            Attached Files

                            if you find these attachements useful please consider making a small donation to the site

                              Comment

                              • hucklebuck73
                                Member
                                • Sep 2012
                                • 22
                                • U.S.A.
                                #28
                                Re: Philips LCD 42" TV Help needed UPDATED w/pix

                                ok great thansk for the help "Mr Bill"
                                Attached Files

                                if you find these attachements useful please consider making a small donation to the site

                                Last edited by hucklebuck73; 10-09-2012, 08:42 PM.

                                  Comment

                                  • hucklebuck73
                                    Member
                                    • Sep 2012
                                    • 22
                                    • U.S.A.
                                    #29
                                    Re: Philips LCD 42" TV Help needed

                                    I have posted pix so please any help on a jumper wire? Or how to reapir that solder pad. Thanks again.

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK
                                        #30
                                        Re: Philips LCD 42" TV Help needed

                                        I'm unable to see the fault - can you zoom in to the area?

                                        edit: Nevermind, I see it - didn't see your other photos until I scrolled up :o. Posting reply shortly.
                                        Last edited by tom66; 10-10-2012, 07:11 AM.
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                          Comment

                                          • tom66
                                            EVs Rule
                                            • Apr 2011
                                            • 32560
                                            • UK
                                            #31
                                            Re: Philips LCD 42" TV Help needed

                                            OK, see the attached images.

                                            Correction on photo #1 (didn't save it in a reversible format - this'll have to do): Where I said place the lead where you have "cut" I should have said where you have scraped.
                                            Attached Files

                                            if you find these attachements useful please consider making a small donation to the site

                                            Last edited by tom66; 10-10-2012, 07:30 AM.
                                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                              Comment

                                              • hucklebuck73
                                                Member
                                                • Sep 2012
                                                • 22
                                                • U.S.A.
                                                #32
                                                Re: Philips LCD 42" TV Help needed

                                                That is so awesome man, thanks so much for everything I'll deff try all that here in a bit when work calms down. Also in your sig is so great the manuals, and I am the same as trying to save items form the trash. I am mostly arcade games, but now slowly getting into other items..Thank you so much for everything.

                                                  Comment

                                                  • hucklebuck73
                                                    Member
                                                    • Sep 2012
                                                    • 22
                                                    • U.S.A.
                                                    #33
                                                    Re: Philips LCD 42" TV Help needed

                                                    well i made the jumper wire and resoldered some solder joints and that was it, put it all back together and now it only stays on 30mins at a time...I am so frustrated about this. I know I am not the best at electronics and am still learning but man o man this sux...

                                                      Comment

                                                      • tom66
                                                        EVs Rule
                                                        • Apr 2011
                                                        • 32560
                                                        • UK
                                                        #34
                                                        Re: Philips LCD 42" TV Help needed

                                                        Well, you made a few dodgy solder joints, did you do them all? Can you post a picture of your soldering?
                                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                                          Comment

                                                          • malik4
                                                            New Member
                                                            • May 2015
                                                            • 8
                                                            • pakistan
                                                            #35
                                                            Re: Philips LCD 42" TV Help needed

                                                            hi
                                                            friends same board philips model 42pfl8803d/30

                                                            is smd diode cod 20 zd704 this vol

                                                            plz help

                                                              Comment

                                                              Previous 1 2 template Next

                                                              Related Topics

                                                              Collapse
                                                              • Sharpa
                                                                Repair attempt Philips 55OLED804/12
                                                                by Sharpa
                                                                Hello,

                                                                I bought a SH Philips 55OLED804/12 TV with known defect in an attempt to repair it for personal use.

                                                                The symptoms when bought: Philips logo appears then tv turns off

                                                                Things tried so far:

                                                                1. Powering it on: Philips logo shows on the screen, sometimes with some minor artefacts then shuts down. Red status led flickers rapidly into two batches then repeats
                                                                2. Put it in recovery mode by pressing joystick down then plugging it to mains: The tv shows the logo then shows the android animation along with some minor artefacts on the screen...
                                                                Yesterday, 08:30 AM
                                                              • alro7779
                                                                Philips 32PFL4901/F8 BA4GF0F0102 2 Not getting standby led
                                                                by alro7779
                                                                Hello, guys!

                                                                The same 32" Philips TV I was having video issues, but now I don't have standby led at all. Someone here shared with me the schematic of the power supply, and checking the voltages, I see right after the resistor R604 I'm getting 1.6 v which is too low for enabling the Gate of the Q601 mosfet (the diagram says 4.2). On the R614 resistor I'm getting 181 V in and 117 V out, then through R603 I'm getting the same 117 V in and 59.9 V out, finally getting the latter voltage in the R604 BUT getting just 1.6 V out, which is the voltage that goes on to the Gate of the Q601...
                                                                09-14-2025, 12:25 AM
                                                              • Maniackk
                                                                Yoga 530-14ARR NM-B781 Ryzen 3 2200 – overheating and shutting down under load
                                                                by Maniackk
                                                                Hi,

                                                                I’ve got a stubborn patient here. The laptop powers on and works, all components like the screen, keyboard, touchpad, etc. are functional. The issue is that it heats up very quickly under load (within a few minutes up to 95°C) and then shuts down shortly after. Subsequent attempts to turn it back on right after a “hot shutdown” result in it shutting off within a few seconds. Interestingly, if I enter the BIOS, it can stay there for 2 days without shutting down (most likely due to low CPU load and low temperatures).

                                                                The cooling system has been cleaned, thermal...
                                                                09-03-2025, 09:32 AM
                                                              • the_basilisk
                                                                Philips VR 670B/39 - sdvice on repair needed
                                                                by the_basilisk
                                                                The Philips VR 670B/39 is a multistandard VCR - PAL/SECAM bought in France.

                                                                It has worked perfectly for many years. Recently the video output has failed.
                                                                When a tape is played, after some 20 sec, the tracking error message 'TRAC' is
                                                                displayed. The video output, when captured and replayed, is just a load of noise, which explains the error message.

                                                                The heads have been cleaned, but that made no difference; The sound output and mechanicals work as normal.

                                                                When I insert a write-protected casette and press the record button, a full
                                                                screen...
                                                                01-19-2022, 04:05 AM
                                                              • G33RT
                                                                Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                                                                by G33RT
                                                                Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                                                                It does power up when pressing the power button.

                                                                I already try the power button while plugin the plug with no result.
                                                                Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                                                                Could this be an PSU or eMMC issue ?
                                                                07-19-2025, 03:43 AM
                                                              • Loading...
                                                              • No more items.
                                                              Working...