Philips LCD 42" TV Help needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hucklebuck73
    Member
    • Sep 2012
    • 22
    • U.S.A.

    #21
    Re: Philips LCD 42" TV Help needed

    Huh I dont understand I posted them and saw them before i logged off last time...Not sure where they went.


    i used the is that not how it works here?

    Comment

    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271

      #22
      Re: Philips LCD 42" TV Help needed

      Originally posted by hucklebuck73
      i used the is that not how it works here?
      Follow my instructions below exactly on how to post pictures.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

      Comment

      • hucklebuck73
        Member
        • Sep 2012
        • 22
        • U.S.A.

        #23
        Re: Philips LCD 42" TV Help needed

        Sorry but i thought they were clear, so i am looking for the manage attachments button? So do i just host them on this site somewhere?

        Comment

        • hucklebuck73
          Member
          • Sep 2012
          • 22
          • U.S.A.

          #24
          Re: Philips LCD 42" TV Help needed

          do you mean the attachments tab under usercp?? Please help so I can post pix the "right" way and get some help.

          Comment

          • Mr Bill
            Badcaps Veteran
            • Nov 2011
            • 648
            • USA

            #25
            Re: Philips LCD 42" TV Help needed

            Just make sure it's within 2000 x 2000. I use windows paint to shrink/crop images.
            Attached Files

            Comment

            • hucklebuck73
              Member
              • Sep 2012
              • 22
              • U.S.A.

              #26
              Re: Philips LCD 42" TV Help needed

              awesome thank you so much i'll try it here now...

              Comment

              • hucklebuck73
                Member
                • Sep 2012
                • 22
                • U.S.A.

                #27
                Re: Philips LCD 42" TV Help needed

                hope this worked
                Attached Files

                Comment

                • hucklebuck73
                  Member
                  • Sep 2012
                  • 22
                  • U.S.A.

                  #28
                  Re: Philips LCD 42" TV Help needed UPDATED w/pix

                  ok great thansk for the help "Mr Bill"
                  Attached Files
                  Last edited by hucklebuck73; 10-09-2012, 08:42 PM.

                  Comment

                  • hucklebuck73
                    Member
                    • Sep 2012
                    • 22
                    • U.S.A.

                    #29
                    Re: Philips LCD 42" TV Help needed

                    I have posted pix so please any help on a jumper wire? Or how to reapir that solder pad. Thanks again.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #30
                      Re: Philips LCD 42" TV Help needed

                      I'm unable to see the fault - can you zoom in to the area?

                      edit: Nevermind, I see it - didn't see your other photos until I scrolled up :o. Posting reply shortly.
                      Last edited by tom66; 10-10-2012, 07:11 AM.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #31
                        Re: Philips LCD 42" TV Help needed

                        OK, see the attached images.

                        Correction on photo #1 (didn't save it in a reversible format - this'll have to do): Where I said place the lead where you have "cut" I should have said where you have scraped.
                        Attached Files
                        Last edited by tom66; 10-10-2012, 07:30 AM.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • hucklebuck73
                          Member
                          • Sep 2012
                          • 22
                          • U.S.A.

                          #32
                          Re: Philips LCD 42" TV Help needed

                          That is so awesome man, thanks so much for everything I'll deff try all that here in a bit when work calms down. Also in your sig is so great the manuals, and I am the same as trying to save items form the trash. I am mostly arcade games, but now slowly getting into other items..Thank you so much for everything.

                          Comment

                          • hucklebuck73
                            Member
                            • Sep 2012
                            • 22
                            • U.S.A.

                            #33
                            Re: Philips LCD 42" TV Help needed

                            well i made the jumper wire and resoldered some solder joints and that was it, put it all back together and now it only stays on 30mins at a time...I am so frustrated about this. I know I am not the best at electronics and am still learning but man o man this sux...

                            Comment

                            • tom66
                              EVs Rule
                              • Apr 2011
                              • 32560
                              • UK

                              #34
                              Re: Philips LCD 42" TV Help needed

                              Well, you made a few dodgy solder joints, did you do them all? Can you post a picture of your soldering?
                              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                              Comment

                              • malik4
                                New Member
                                • May 2015
                                • 8
                                • pakistan

                                #35
                                Re: Philips LCD 42" TV Help needed

                                hi
                                friends same board philips model 42pfl8803d/30

                                is smd diode cod 20 zd704 this vol

                                plz help

                                Comment

                                Related Topics

                                Collapse

                                • the_basilisk
                                  Philips VR 670B/39 - sdvice on repair needed
                                  by the_basilisk
                                  The Philips VR 670B/39 is a multistandard VCR - PAL/SECAM bought in France.

                                  It has worked perfectly for many years. Recently the video output has failed.
                                  When a tape is played, after some 20 sec, the tracking error message 'TRAC' is
                                  displayed. The video output, when captured and replayed, is just a load of noise, which explains the error message.

                                  The heads have been cleaned, but that made no difference; The sound output and mechanicals work as normal.

                                  When I insert a write-protected casette and press the record button, a full
                                  screen...
                                  01-19-2022, 04:05 AM
                                • Alschepmist
                                  Philips 60pfl6008k/12 NVM needed
                                  by Alschepmist
                                  Hello guys i have problem with a philips 60pfl6008k/12 .
                                  The problem was a corrupted nand i have reprogrammed the nand with a generic qfu 1.2e la dump and the tv now works but i have a problem with the standby processor has anyone then NVM file backup from a working set? ?
                                  11-09-2020, 03:00 PM
                                • aidanmo
                                  Philips 43PUS7506/12 - Loud blown out sound
                                  by aidanmo
                                  Hello,

                                  I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
                                  I thought maybe the speakers got damaged, so I replaced them - no dice.
                                  • Using the internal speakers, it always happens.
                                  • Using the headphone jack, it never happens.
                                  • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
                                  ...
                                  02-28-2025, 03:13 PM
                                • Cornito
                                  Philips 50PUH6400 bad color and gosting / slow motion on one side
                                  by Cornito
                                  Hello Team,

                                  New issue on LCD panel where I need to find out the cause and the potential solution.
                                  This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.

                                  I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
                                  When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.

                                  I've checked voltages, no issue found comparing right and left side of the panel driver.
                                  VHG VGL CKV... are the sames on...
                                  03-08-2024, 06:41 AM
                                • spantor
                                  Activate power board Philips 40PFH40009/88 tv
                                  by spantor
                                  Hello partners.

                                  Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
                                  The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
                                  02-11-2024, 05:07 PM
                                • Loading...
                                • No more items.
                                Working...