Sony KDL-32L4000 Double image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mr Bill
    Badcaps Veteran
    • Nov 2011
    • 648
    • USA

    #1

    Sony KDL-32L4000 Double image

    The top 2" of the screen is pefrect but below that point the screen is blurry and showing a double image. I thought this would be a bad tcon board but i got a replacement from Shop Jimmy today and it didn't correct the display. Is it possible to have a faulty tcon? Can a faulty TAB do this? I would think it would be from the top of the screen to the bottom but i haven't had a tv with a loose tab yet. Twisting the screen doesn't seem to do anything and there is no slow motion or darkness.

    I am going to disassemble the panel and see if the tabs are loose. Just getting some feedback and see if i'm wasting my time. The panel is a Samsung LTY320AB01

    Thanks
    Attached Files
  • freakaftr8
    Badcaps Legend
    • Oct 2012
    • 3743
    • USA

    #2
    Re: Sony KDL-32L4000 Double image

    Wow we are having the same issue. Is your panel underneath the good section jumpy and at times show a smeared image from what's on the top? Check out my thread. Mines an auria 32" with a Samsung LTA320AB02 panel. My good/bad line is 6" from the top. Everything under that is vertically jumpy and smeared.

    https://www.badcaps.net/forum/showthread.php?t=23205
    Did I leave the soldering iron on?

    Comment

    Related Topics

    Collapse

    Working...