Vizo VW46LFHDTV10A want turn on

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271
    #21
    Re: Vizo VW46LFHDTV10A want turn on

    The results in post #20 is impossible to read. Try using the code as explained here

    https://www.vbulletin.com/forum/misc.php?do=bbcode#code

    so it is monospaced.

    Also, using a leading 0 like so

    0.34

    instead of

    .34
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271
        #22
        Re: Vizo VW46LFHDTV10A want turn on

        The main board picture is terrible (poor focus, composition), but I think I managed to identify all your voltage regulators (in red). I also circled your fuses in green. A good fuse should measure less than 1.0 ohms.
        Attached Files
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK
            #23
            Re: Vizo VW46LFHDTV10A want turn on

            You missed two big ones between the four red regulators.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • retiredcaps
                Badcaps Legend
                • Apr 2010
                • 9271
                #24
                Re: Vizo VW46LFHDTV10A want turn on

                An example of the code at work

                https://www.badcaps.net/forum/showthread.php?t=22171

                Notice how everything is monospace and more easily readable.
                --- begin sig file ---

                If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                Please do not post inline and offsite as they slow down the loading of pages.

                --- end sig file ---

                  Comment

                  • retiredcaps
                    Badcaps Legend
                    • Apr 2010
                    • 9271
                    #25
                    Re: Vizo VW46LFHDTV10A want turn on

                    Originally posted by tom66
                    You missed two big ones between the four red regulators.
                    Well, it is obvious that the UK has a better eye care program than Canada.

                    On my screen, they look like two huge BGA blobs.
                    --- begin sig file ---

                    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                    Please do not post inline and offsite as they slow down the loading of pages.

                    --- end sig file ---

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK
                        #26
                        Re: Vizo VW46LFHDTV10A want turn on

                        Originally posted by retiredcaps
                        Well, it is obvious that the UK has a better eye care program than Canada.

                        On my screen, they look like two huge BGA blobs.
                        Mostly free eye care here, but I've not needed it in particular. The photo is very blurry though, and I can understand if you missed them!
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • ronbass
                            Member
                            • Aug 2012
                            • 10
                            • US
                            #27
                            Re: Vizo VW46LFHDTV10A want turn on

                            I'm sorry i posted them like i saw in how to test voltage regulators. Din't know this was a grammar class

                              Comment

                              • selldoor
                                Slow Learner
                                • Dec 2010
                                • 7870
                                #28
                                Re: Vizo VW46LFHDTV10A want turn on

                                Originally posted by retiredcaps
                                Well, it is obvious that the UK has a better eye care program than Canada.
                                I dont think so, its probably just because you've gone blind looking at terrible
                                pictures on here for much longer than we have.
                                Please upload pictures using attachment function when ask for help on the repair
                                http://www.badcaps.net/forum/showthread.php?t=39740

                                  Comment

                                  Previous 1 2 template Next

                                  Related Topics

                                  Collapse
                                  • howardc64
                                    TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                                    by howardc64
                                    All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                                    • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                                    • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                                    ...
                                    07-24-2025, 05:17 PM
                                  • brzostos
                                    HP ENVY X360 15-EU0005NA 203037-2 does not turn on, something whistles on the board.
                                    by brzostos
                                    Hello, HP laptop model 15-EU0005NA. It does not turn on, 1 in 100 manages to turn it on then after a while it freezes/disappears/flashes, etc.

                                    After removing the motherboard and connecting the board with RAM to the power supply, I noticed that at first all voltages start correctly and after a few seconds 3.3V on the PL4501 coil disappears and somewhere in this area something starts beeping on the board, sometimes after touching it with a finger in the area of PL4551 it stops beeping and 3.3V appears again.

                                    Original HP 150W power supply, the diode in the power socket lights...
                                    10-01-2024, 01:34 AM
                                  • Tynan Dill
                                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                    by Tynan Dill
                                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                    Upon bringing it home and plugging it up, it showed a standby light.

                                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                    Assuming...
                                    ORIGINAL POWER SUPPLY BOARD
                                    7 Photos
                                    11-22-2024, 01:46 PM
                                  • m1ch43lzm
                                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                    by m1ch43lzm
                                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                    05-12-2025, 08:37 PM
                                  • Hakuu
                                    LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                                    by Hakuu
                                    Hi There,

                                    This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                                    After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                                    More Details

                                    TV Model - LG OLED77G1PUA

                                    Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                                    07-12-2023, 02:37 PM
                                  • Loading...
                                  • No more items.
                                  Working...