Vizio VA26LHDTV10T IC IN POWER BOARD

[hijodalgo]

Please help me with this Vizio Power Board IC,don't see the number because its cracked,took some pictures but they are not that good specially on the ic ,I need the number of the IC if anyone knows,please give me a hand,,Thanks..

[awyatt2]

Re: Vizio VA26LHDTV10T IC IN POWER BOARD

somewhere on the board is a part number for the board, you need that number to go any further. this set uses more than one power supply. shop jimmy has several supplies in stock.

[ben7]

Re: Vizio VA26LHDTV10T IC IN POWER BOARD

Also, before replacing that chip, check the MOSFETs on the primary side heatsink, one or both of them may be shorted.

[hijodalgo]

Re: Vizio VA26LHDTV10T IC IN POWER BOARD

Thanks for fast response,,I missed the power board part number by mistake,,715T3003-1 and the IC location is IC901,,barely i can see some letters on the burned IC it started with PA..but no more..thanks again..

[Bafury]

Re: Vizio VA26LHDTV10T IC IN POWER BOARD

hijodalgo
i have that same tv with same model number...It has a cracked screen, but all the internal components are fully working.. Let me know if you're interested in buying any parts from it

[roger69504]

Re: Vizio VA26LHDTV10T IC IN POWER BOARD

hijodalgo
i have that same tv with same model number...It has a cracked screen, blocking he interesan mponents are fully working.. Let me know if you're interested in buying any parts from it

I'm trying to fix the same TV model. Bafury would you still happen to have any parts for sale still? Looking for at least the power supply board to start with it was hit by lightening and the main cap C907 has a burnt through short on the positive? Electrode with a bad scorch mark on the board so not sure if much of the power board is usually or job. I can't believe the invite fuse didn't go. Any who I'mlooking to fix and give to a younger poor ccollege brother of mine so any advice or source of parts would be welcomed. Sorry to revive a year oldt thread.