VW46LFHDTV10A - Half of Screen Dark and Distorted

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stevekasian
    Old N00b
    • Dec 2010
    • 182
    • USA - West Side!

    #1

    VW46LFHDTV10A - Half of Screen Dark and Distorted

    Hi guys and gals. Long time no post!

    I am looking at a Vizio VW46LFHDTV10A TV for sale with the following problem... I've seen it before, and I know it is a common problem with a known cause, I just don't recall what the cause is and can't seem to find it in the forum here!

    Below is a picture of the screen and what it's doing. Would y'all be so kind as to reply with the common cause of this if you know? If I purchase it, I'll post my repair progress here.

    Thanks!
    Steve Kasian
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

    Bad tab bonds (bad LCD panel) with a 90% chance of being fixable.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • stevekasian
      Old N00b
      • Dec 2010
      • 182
      • USA - West Side!

      #3
      Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

      Thank you Tom66!

      How difficult of a fix is this? I've repaired every board on LCD and Plasma monitors & TVs except the screen and backlighting. Is it something I'm going to need a cleanroom for or anything crazy like that?

      Also, how much $ would YOU offer for a TV with this problem?

      Thanks,
      SK

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

        Originally posted by stevekasian
        Thank you Tom66!

        How difficult of a fix is this? I've repaired every board on LCD and Plasma monitors & TVs except the screen and backlighting. Is it something I'm going to need a cleanroom for or anything crazy like that?

        Also, how much $ would YOU offer for a TV with this problem?

        Thanks,
        SK
        I'd offer at most $40 because you could probably break even on selling the parts then.

        The fix is tricky, it involves disassembling the TV completely to get to the LCD panel. (I've done this before to fix a mura/clouding issue.) Then you have to get to the tab bonds on the top of the screen and find which one causes the problem by applying light pressure to them until the picture gets better. Find a way to apply this pressure permanently - people have used rubber bumpers, plastic spacers etc. with success.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • stevekasian
          Old N00b
          • Dec 2010
          • 182
          • USA - West Side!

          #5
          Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

          Thanks so much! Mucho appreciado!

          I think I'm gonna pass on this one. Sounds like a lot of work. Couple that with the fact that they're asking $200 for the thing because they think "it's an easy fix", which will make price negotiation a whole load of fun. ;-)

          SK

          Comment

          • tibimakai
            Badcaps Legend
            • Jan 2012
            • 3680
            • USA

            #6
            Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

            Recently I had one of these and I couldn't fix it(and a Samsung too 46A550), now I have parts for sale from this(these) TV(s).

            Comment

            • LookItsMikeO
              I'm Dumb.
              • Jan 2014
              • 2
              • USA

              #7
              Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

              Any update on this? I got this Vizio for free from an old job and that keeps happening. It's a 46 inch and our other TV is a 32 inch, 200 dollar special that my wife thought was a great deal. Don't have the cash to buy something comparable and I'm tech dumb so, help?

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

                See here, different symptom same cause
                http://www.youtube.com/watch?v=purk_SyiT44
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • LookItsMikeO
                  I'm Dumb.
                  • Jan 2014
                  • 2
                  • USA

                  #9
                  Re: VW46LFHDTV10A - Half of Screen Dark and Distorted

                  Interesting. It was a free TV so what do I have to lose eh?

                  Comment

                  Related Topics

                  Collapse

                  • Chrissygizmo
                    Samsung UE55JU6800K half screen dark
                    by Chrissygizmo
                    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                    02-10-2025, 12:33 AM
                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • valvashon
                    LG 55UH6150- trouble powering up, then half lit screen (pictures!)
                    by valvashon
                    The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
                    Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
                    11-24-2024, 12:08 PM
                  • Raulnn
                    TD Systems K50DLG12US half black and half white screen
                    by Raulnn
                    good night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?

                    By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the...
                    01-20-2024, 04:49 PM
                  • scubacamper
                    Sharp Aquos LC-70C6400U Half Screen Dark
                    by scubacamper
                    I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                    Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                    when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                    05-03-2025, 12:19 PM
                  • Loading...
                  • No more items.
                  Working...