Announcement

Collapse
No announcement yet.

pioneer plasma PDP-435PE

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
    #1

    pioneer plasma PDP-435PE

    Has any1 here ever worked on 1 of these sets..when powered on the led flashes from green to red continuesly..when pressed power button at the side the red led flashes 2 times pause then 2 times..thats with & without the media receiver box connected..on the receiver box the red & green led are on solid when connected to tv..ive not worked on a plasma before was hoping to find bulged caps but all seem ok..the psu is PCB2524 A06-125581
    Tags: None
    #2
    Re: pioneer plasma PDP-435PE

    Service manual:

    Page 58.

    Red LED flashing two times indicates MR-AC power off (media receiver power off.) This probably indicates a fault with the AC detect, PFC stage or perhaps another part of the power supply. It may also indicate a media receiver fault.

    Start by taking pictures.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

      #3
      Re: pioneer plasma PDP-435PE

      I love Pioneer stuff. You need to find a Pioneer 5090 to fix and keep Tom they are awesome!
      Fixed so far : 1 Home cinema system, 16 LCD Monitors, 4 LCD TV's

      How to resize your pictures guide click HERE
      Retiredcaps Ideal post example click HERE

      Comment

        #4
        Re: pioneer plasma PDP-435PE

        Originally posted by Jasgriff View Post
        I love Pioneer stuff. You need to find a Pioneer 5090 to fix and keep Tom they are awesome!
        I haven't yet fixed a Pioneer or a Sony. Both I am looking out for. I also want a Panasonic LCD - after fixing a Panasonic plasma as I've seen how well they are built.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

          #5
          Re: pioneer plasma PDP-435PE

          http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=290682203608

          Why don't you see if you can get this one nice and cheap! He has listed it twice. I would have it if I lived closer.
          Fixed so far : 1 Home cinema system, 16 LCD Monitors, 4 LCD TV's

          How to resize your pictures guide click HERE
          Retiredcaps Ideal post example click HERE

          Comment

            #6
            Re: pioneer plasma PDP-435PE

            Originally posted by tom66 View Post
            Service manual:

            Page 58.

            Red LED flashing two times indicates MR-AC power off (media receiver power off.) This probably indicates a fault with the AC detect, PFC stage or perhaps another part of the power supply. It may also indicate a media receiver fault.

            Start by taking pictures.
            Hi tom..how do i download that manual..some pics of the pin outs..am i testing the voltages with all the plug leads in thx
            http://i1068.photobucket.com/albums/...5/P1000937.jpg
            http://i1068.photobucket.com/albums/...5/P1000936.jpg
            http://i1068.photobucket.com/albums/...5/P1000935.jpg
            http://i1068.photobucket.com/albums/...5/P1000938.jpg
            http://i1068.photobucket.com/albums/...5/P1000933.jpg

            Comment

              #7
              Re: pioneer plasma PDP-435PE

              Originally posted by sienoki View Post
              Hi tom..how do i download that manual..some pics of the pin outs..am i testing the voltages with all the plug leads in thx
              http://i1068.photobucket.com/albums/...5/P1000937.jpg
              http://i1068.photobucket.com/albums/...5/P1000936.jpg
              http://i1068.photobucket.com/albums/...5/P1000935.jpg
              http://i1068.photobucket.com/albums/...5/P1000938.jpg
              http://i1068.photobucket.com/albums/...5/P1000933.jpg
              Use Manage Attachments to add pictures.

              Click "Get Manual" after about 30 seconds, appears near bottom of page.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

                #8
                Re: pioneer plasma PDP-435PE

                Originally posted by tom66 View Post
                Use Manage Attachments to add pictures.

                Click "Get Manual" after about 30 seconds, appears near bottom of page.
                Sos for not using manage attachments it wasnt working properly last time..do you only need psu pics for now..thx

                Comment

                  #9
                  Re: pioneer plasma PDP-435PE

                  Originally posted by sienoki View Post
                  Sos for not using manage attachments it wasnt working properly last time..do you only need psu pics for now..thx
                  Nope, I'd look at the media box. Do you have the whole set?
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                    #10
                    Re: pioneer plasma PDP-435PE

                    Originally posted by tom66 View Post
                    Nope, I'd look at the media box. Do you have the whole set?
                    Yes ive got full set..ive already opened up media box was growing a carpet inside it was that dusty..will open it back up and take pics..thx

                    Comment

                      #11
                      Re: pioneer plasma PDP-435PE

                      Originally posted by sienoki View Post
                      Yes ive got full set..ive already opened up media box was growing a carpet inside it was that dusty..will open it back up and take pics..thx
                      taken readings from 16pinout of media box
                      all seem ok apart from 14 & 16 reading 2.461vdc & 2.690vdc..wtf

                      Comment

                        #12
                        Re: pioneer plasma PDP-435PE

                        Originally posted by sienoki View Post
                        taken readings from 16pinout of media box
                        all seem ok apart from 14 & 16 reading 2.461vdc & 2.690vdc..wtf
                        Pics or it didn't happen .
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                          #13
                          Re: pioneer plasma PDP-435PE

                          Originally posted by sienoki View Post
                          taken readings from 16pinout of media box
                          all seem ok apart from 14 & 16 reading 2.461vdc & 2.690vdc..wtf
                          http://i1068.photobucket.com/albums/...5/P1000965.jpg
                          http://i1068.photobucket.com/albums/...5/P1000970.jpg

                          Comment

                            #14
                            Re: pioneer plasma PDP-435PE

                            Originally posted by tom66 View Post
                            Pics or it didn't happen .
                            Tom i was taken all the pin out readings & pics but keep getting timed out on this site..is there a setting on this site cos it does my box in..i aint a fast typer lol

                            Comment

                              #15
                              Re: pioneer plasma PDP-435PE

                              Originally posted by sienoki View Post
                              Sos for not using manage attachments it wasnt working properly last time..do you only need psu pics for now..thx
                              It is because your pics exceed the restrictions below. Use manage attachments.
                              --- begin sig file ---

                              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                              Please do not post inline and offsite as they slow down the loading of pages.

                              --- end sig file ---

                              Comment

                                #16
                                Re: pioneer plasma PDP-435PE

                                Originally posted by retiredcaps View Post
                                It is because your pics exceed the restrictions below. Use manage attachments.
                                I keep getting upload failed when using manage attachments..you guys will have to bear with me on this 1..its all opened up on my bed & wife doing my head in...i need a workshop with a hammock..lol
                                Gonna get some more pics sorted

                                Comment

                                  #17
                                  Re: pioneer plasma PDP-435PE

                                  Obviously, first step check all supply voltages to media box.

                                  How does the media box connect to TV? Does TV have any inputs on rear, or is it just one IO cable between media box and TV?

                                  I have my own shed, dedicated to TVs...
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                    #18
                                    Re: pioneer plasma PDP-435PE

                                    Originally posted by tom66 View Post
                                    Obviously, first step check all supply voltages to media box.

                                    How does the media box connect to TV? Does TV have any inputs on rear, or is it just one IO cable between media box and TV?

                                    I have my own shed, dedicated to TVs...
                                    Its a PDP-R05FE media box connects to tv with 1 cable split in 2..
                                    http://i1068.photobucket.com/albums/...5/P1000992.jpg
                                    http://i1068.photobucket.com/albums/...5/P1000970.jpg
                                    http://i1068.photobucket.com/albums/...5/P1000965.jpg
                                    Last edited by sienoki; 03-16-2012, 05:19 PM.

                                    Comment

                                      #19
                                      Re: pioneer plasma PDP-435PE

                                      Okay one DVI and one PanelLink cable. Fun, custom interfaces.

                                      Check for good supply voltages - 3.3V, 6.5V, 12V, 17V.

                                      Read service manual troubleshooting flowchart... follow all the steps.

                                      Especially check the AC detect signal.

                                      Plug the DVI output into a DVI monitor if you have one available... check if you get video.

                                      If no DVI monitor use a DVI-HDMI cable and plug into a HDMI TV.
                                      Last edited by tom66; 03-16-2012, 06:17 PM.
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                        #20
                                        Re: pioneer plasma PDP-435PE

                                        Originally posted by tom66 View Post
                                        Okay one DVI and one PanelLink cable. Fun, custom interfaces.

                                        Check for good supply voltages - 3.3V, 6.5V, 12V, 17V.

                                        Read service manual troubleshooting flowchart... follow all the steps.

                                        Especially check the AC detect signal.

                                        Plug the DVI output into a DVI monitor if you have one available... check if you get video.

                                        If no DVI monitor use a DVI-HDMI cable and plug into a HDMI TV.
                                        If i press both tv & receiver box power buttons at same time the tv led is solid red(standby) & receiver both green & red both solid..took measurements from receiver box & voltages seem to be correct on all boards...cant test the leads got no other source to try on..does it sound like tv at fault & not receiver..thx
                                        The AC detect pin being 2.690vdc does that seem to high??
                                        Last edited by sienoki; 03-16-2012, 07:48 PM.

                                        Comment

                                        Previous 1 2 3 4 template Next
                                        Working...
                                        X