Hello all,
Its been a couple of months since I last posted here.
I have a problem with a TECO LCD TV Psu.
I started working on this PSU a couple of months ago, and all I remember is I replaced some FETs and Diodes as they where shorted.
But now I forgot what I did.
Today I tried it using the bulb method and it seems that it is still shorted as the bulb is lit when I turn the power on.
I am using 60w bulb. Could it be that the bulb is too small in wattage? or I still have a short in the PSU?
The problem with the PSU was that it was shorted and will explode when I connected to the main supply.
The psu is a MLT666A
Any feedback is greatly appreciated.
Thanks
Mario
Its been a couple of months since I last posted here.
I have a problem with a TECO LCD TV Psu.
I started working on this PSU a couple of months ago, and all I remember is I replaced some FETs and Diodes as they where shorted.
But now I forgot what I did.
Today I tried it using the bulb method and it seems that it is still shorted as the bulb is lit when I turn the power on.
I am using 60w bulb. Could it be that the bulb is too small in wattage? or I still have a short in the PSU?
The problem with the PSU was that it was shorted and will explode when I connected to the main supply.
The psu is a MLT666A
Any feedback is greatly appreciated.
Thanks
Mario