Will a S42AX-YD01 screen work with a Magnavox 42MF438B/27??

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Paul678
    Badcaps Veteran
    • Nov 2011
    • 402
    #1

    Will a S42AX-YD01 screen work with a Magnavox 42MF438B/27??

    Someone has asked me about my replacement
    screen.

    Shopjimmy.com has the part numbers of the boards,
    but not the screens. Is there a website that has
    this info, or does this person need to at least take
    the back of the TV off to see?
    Tags: None
    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA
      #2
      Re: Will a S42AX-YD01 screen work with a Magnavox 42MF438B/27??

      Elektrotanya probably has the service manual for the TV. Philips (owner of the Magnavox brand name) usually has very retailed parts lists, and I would expect them to include the manufacturer's part number for the plasma panel - they did on other sets.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

        Comment

        • PlainBill
          Badcaps Legend
          • Feb 2009
          • 7034
          • USA
          #3
          Re: Will a S42AX-YD01 screen work with a Magnavox 42MF438B/27??

          One thing that continues to appall me is the lack of resourcefulness on the part of some people (others dazzle me with their ingenuity and persistence).

          Googling 42MF438B/27 I find it is an 1080P LCD TV. The S42AX-YD01 is a 720P Plasma TV. The panels are not interchangeable.

          PlainBill
          For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

          Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • benek123
              RedmiBook 15 pro 2023 Ryzen - after replace LCD screen work only in windows
              by benek123
              I replaced the screen and LCD ribbon in Redmi Book 15 Pro Ryzen 2023. After replacing, the image on the screen is only visible in Windows 11 - when the AMD drivers are loaded.

              The screen is backlit but there is no image in: bios, post, when loading windows, in linux (ubuntu boot from usb), windows 10 PE.
              When I disconnect the EDP connector from the board and connect the HDMI cable, the image is visible everywhere good, in the BIOS you can see 2/3 of the image, i.e. 1920 pixels out of 3000 pixels.
              I checked the EDID with the old screen - it is identical.

              What...
              09-24-2024, 03:28 PM
            • reformatt
              Macbook Air M2 A2681 Kernel panics after screen replacement
              by reformatt
              Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

              It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
              07-31-2025, 08:37 PM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • ronaldopdias
              A3113 corrosion to LAS = No keyboard, yet screen and trackpad work fine
              by ronaldopdias
              Hi All.

              I have a A3113 MacBook Air 13" (M3) that had minor liquid damage. The screen remains on if the lid is closed, the keyboard doesn't work, but trackpad and Touch ID does.​
              The LAS was corroded, but I have tested it on an A2681 (M2) and it functions fine. Anyway, I ordered a new one and replaced it and calibrated it with Apple.

              I have checked the main voltages going to the daughterboard and they are present. Diode mode reading on the LAS line which goes direct to the SoC is also correct, no short.

              So then I replaced the daughterboard, and...
              06-16-2025, 03:12 AM
            • Loading...
            • No more items.
            Working...