Polaroid FLM-3732 scrambled picture
I have a Polaroid FLM-3732 LCD tv. The problem started with no picture or sound, just black screen. I replaced the main board with a board that did not have the exact part numbers as the one in the tv. The board looked exactly the same, just a few numbers off. Could not find one with the exact numbers. After I put the replacement board in the picture and sound returned.Yahoo!!! Now the picture is very washed out and color crazy. I'm wondering if this is the result of the wrong main board or is there something else wrong. Like the T-con board? Any suggestions. Thanks, Scott
-
-
Re: Polaroid FLM-3732 scrambled picture
I can't really SEE what you're talking about. Pictures help.The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS
-
Re: Polaroid FLM-3732 scrambled picture
Sorry, heres some pics.Attached FilesComment
-
-
Re: Polaroid FLM-3732 scrambled picture
What you are seeing is due to the board being mis-matched to the panel. It is possible that there is some setting(s) in the NVRam adjustments that would take care of it, but it is not extremely likely. Chances are you will either need to obtain the correct baord, or replace the LCD Panel too.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hi all!
I've recently run into an issue with my Samsung UN55H8000AF LED TV displaying no image. I've done quite a bit of research in terms of what could be wrong with it. Below are the steps I've taken prior to reaching out here for some assistance:
1. I've tried replacing the T-Con board (BN95-01594A), twice and have still experienced the same issue with all the boards I've tested with.
2. I've tried to remove one side of the ribbon cable that goes from the T-Con board to the panel and still not getting any image on left or right side.
3. I've checked voltages... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"... -
Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..
Is there anything I can do to flip the picture or do I need to change the board again..
Thanks
Garry...
Comment