Re: Samsung LE32R88BD/ BN44-00155A
GM folks, this thread is full of knowledge. I have the BN44-00192A which is apparently similar or even a drop in replacement of the one in this thread.
Symptom: solid red stdby led. Tv is responsive to remote... The led blinks when I use it but that's all.
I already replaced all the caps on the mainboard side, they were visually bad. But the problem is still here.... I'll look for that resistor next the the big cap on the primary.
5vsb is present and I have a 4.3V ish PS_ON for a couple seconds when I use the power on button or the Power On button on the remote so I think the PSU never switches to high voltage.
Will check that next week end.
GM folks, this thread is full of knowledge. I have the BN44-00192A which is apparently similar or even a drop in replacement of the one in this thread.
Symptom: solid red stdby led. Tv is responsive to remote... The led blinks when I use it but that's all.
I already replaced all the caps on the mainboard side, they were visually bad. But the problem is still here.... I'll look for that resistor next the the big cap on the primary.
5vsb is present and I have a 4.3V ish PS_ON for a couple seconds when I use the power on button or the Power On button on the remote so I think the PSU never switches to high voltage.
Will check that next week end.
Comment