Samsung 50" plasma screen color issue

[kells_15]

So I have been doing a little research about plasma screens in an attempt to fix my own, I have a 50 inch Samsung Plasma, that I am having an issue with color distortion, the screen has what is almost like a red or pink overlay to the whole screen, which comes in and out randomly. From what i've been reading on these forums it sounds like it may be either my Y-Sus Main board and/or y buffer boards, I guess my only question is am i better off to just replace all three boards, or is there a way to isolate the damaged board to figure out which one it is exactly. Also I guess I am unsure if that is even the problem or if it would possibly be the x boards, or any other part for that matter. Any input would be very helpful.

All the model numbers I could find on the TV are listed below, hope it helps.
Model Number: PN50A450P1DXZA
Serial Number: AKWX3CQQC07499L
Version Number: S007

[rayrod81]

Re: Samsung 50" plasma screen color issue

Take the back off of the TV and take pictures of the back as a whole and the boards independently. Also take a picture of the screen when the problems occur. Attach the pictures using the 'manage attachments' button when you post. Here is a link to the instructions: https://www.badcaps.net/forum/showthread.php?t=1868

When we get pictures then will be able to answer your question. Without pictures any advice would just be a shot in the dark.

[kells_15]

Re: Samsung 50" plasma screen color issue

K these are all of the boards, if you need anything else please let me know, like i said the whole screen is showing up with what appears to me to be an overlay of red, thank you again in advance, as far as i can see i couldn't find anything that looked like it had been overheated or like it was smoked, the images are somewhat blurry I may be able to track down a little better camera tomorrow if need be, please let me know.