insignia NS-32LCD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mvtr2002
    New Member
    • Sep 2011
    • 2

    #1

    insignia NS-32LCD

    Have a insignia NS-32LCD in the shop starts fine but loses back light after 15-30 minutes. Looking at the 24 volt supply it starts out low under 23 volts as the set warms up the voltage drops to about 20 volts.The back light will come and go with no set pattern .the audio stays.
    To me seems like some capacitor problem,I have substituted 3 1000uf but same problem. diconected 24 v line voltage stays low.Turn tv off back on you get the 22v and can see a stead drop.I know(think) it is pwr supply problem but cant pin point it.It is also heat related be cause with back on problem appears,without runs ok except the fact the 24v line low .cover power supply problem starts.uncovered tv runs but that 24v bugs me.
    I appreciate any ideas/feedback thanx
    Last edited by mvtr2002; 09-22-2011, 05:08 AM.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: insignia NS-32LCD

    What capacitors (brand, series) did you use to replace the ones on the inverter bus?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • billansor
      Senior Member
      • Apr 2011
      • 85

      #3
      Re: insignia NS-32LCD

      Several things to consider and to look for.

      1) The supply voltage (24) volts may be okay but it is being dragged down. Check to see if you have an abnormally hot inverter transformer. If one of them are heating more so than the others....You may want to check around that transformer and see if there is burning going on. Replacing that transformer may solve the issue. Also check caps on the inverter board too.

      2) You also may have one of the 'tubes' going bad which will also drag down your supply voltages, other members on here can verify if that is a potential possibility.

      3) Do you have a schematic? If so, can you post pictures of the power supply section?

      Comment

      Related Topics

      Collapse

      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • sam_sam_sam
        Modification to a ZD-987 desoldering/soldering station using a external switching power supply
        by sam_sam_sam
        I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

        I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
        07-01-2024, 06:34 AM
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • sam_sam_sam
        Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
        by sam_sam_sam
        This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

        I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

        I am comparing them to a brand new one that I installed

        The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

        I going to let it run for several days before I remount back on the wall next to the...
        09-05-2024, 06:48 PM
      • JimBanville
        Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
        by JimBanville
        The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
        Opened it up and discovered the power supply is making a faint clicking or ticking sound.
        I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
        I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
        09-13-2023, 07:21 AM
      • Loading...
      • No more items.
      Working...