Viore 26" LCD TV Backlight Inverter issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • itek
    Senior Member
    • Aug 2010
    • 65

    #1

    Viore 26" LCD TV Backlight Inverter issue

    Hi everybody, I have a 26" Viore LCD here Model LC26VH55. It was showing a picture and rapidly flashing the backlight for awhile now its just dark. I can see it is displaying images with a flashlight. So I'm guess i'm in for a new inverter board right? the one inside is stamped CMO I260B1-5UC-A001B / T87I027.09 / 27-D024386. Do I have to replace with the exact board or can I switch to one thats close like this one:
    http://cgi.ebay.com/VIZIO-VA26L-BACK...item56436069ebf
    its very close just wondering since I am so new at this,
    Thanks!





  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #2
    Re: Viore 26" LCD TV Backlight Inverter issue

    If you are going to be a regular member here, please use the manage attachments feature to upload your picture and please do not post inline. There are several reasons why as stated below

    https://www.badcaps.net/forum/showpo...5&postcount=12
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    • itek
      Senior Member
      • Aug 2010
      • 65

      #3
      Re: Viore 26" LCD TV Backlight Inverter issue

      OK sorry I didn't know how to do that, will do from now on!!! Thanks retirecaps

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271

        #4
        Re: Viore 26" LCD TV Backlight Inverter issue

        Originally posted by itek
        It was showing a picture and rapidly flashing the backlight for awhile now its just dark. I can see it is displaying images with a flashlight.
        1) Did you check to see if there are any SMD fuses on the inverter board? If yes, do the fuses measure less than 1.0 ohms?

        2) Did you check the secondary inverter transformer pins to see if the ohms readings are within 3% of each other?
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

        • itek
          Senior Member
          • Aug 2010
          • 65

          #5
          Re: Viore 26" LCD TV Backlight Inverter issue

          will check and report back asap, thanks again

          Comment

          • itek
            Senior Member
            • Aug 2010
            • 65

            #6
            Re: Viore 26" LCD TV Backlight Inverter issue

            OK it seems there are 3 SMD fuses on the board although they are labeled F2-F4, they all report 0 ohms resistance.
            Each transformer reports back very close, definitely within 3%.

            Comment

            • retiredcaps
              Badcaps Legend
              • Apr 2010
              • 9271

              #7
              Re: Viore 26" LCD TV Backlight Inverter issue

              Originally posted by itek
              they are labeled F2-F4,
              If I were designing a board, I would starting numbering with 1. That said, check for a F1.
              --- begin sig file ---

              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

              Please do not post inline and offsite as they slow down the loading of pages.

              --- end sig file ---

              Comment

              • itek
                Senior Member
                • Aug 2010
                • 65

                #8
                Re: Viore 26" LCD TV Backlight Inverter issue

                OK I found it - F1 0.75A / 76V, test 0 ohms,, the other 3 are white this ones black it was blending in
                Last edited by itek; 04-23-2011, 01:20 PM.

                Comment

                • retiredcaps
                  Badcaps Legend
                  • Apr 2010
                  • 9271

                  #9
                  Re: Viore 26" LCD TV Backlight Inverter issue

                  1) Your photos are too low in resolution to see the part number, but try checking the 8 pin IC for shorts. You will have to read the part number and look for its datasheet.

                  There are 6 of them. There are 2 ICs "sandwiching" each of the 3 caps on the inverter board.

                  2) What brand and make are the caps. You could try changing them?
                  --- begin sig file ---

                  If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                  We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                  Please do not post inline and offsite as they slow down the loading of pages.

                  --- end sig file ---

                  Comment

                  • itek
                    Senior Member
                    • Aug 2010
                    • 65

                    #10
                    Re: Viore 26" LCD TV Backlight Inverter issue

                    OK the mosfets are AO4614, I'm new at this and trying to decipher the datasheet on how to test them. is it "Static Drain-Source On-Resistance" or "Gate Resistance" i'm going for? My multimeter is a fluke 179 and always wants to "auto range" is this ok or should I always set it manually?
                    The caps are as follows:
                    1. (no name?) KZH 35v 390uf
                    2. Nichicon HV 35v 270uf
                    3. Rubycon ZLH 35v 390uf
                    Thanks,
                    Jared

                    Comment

                    • retiredcaps
                      Badcaps Legend
                      • Apr 2010
                      • 9271

                      #11
                      Re: Viore 26" LCD TV Backlight Inverter issue

                      Originally posted by itek
                      OK the mosfets are AO4614,
                      See section on MOSFETs at

                      https://www.badcaps.net/forum/showpo...0&postcount=13

                      My multimeter is a fluke 179 and always wants to "auto range" is this ok or should I always set it manually?
                      Nice multimeter! Leave it at auto.

                      The caps are as follows:
                      1. (no name?) KZH 35v 390uf
                      2. Nichicon HV 35v 270uf
                      3. Rubycon ZLH 35v 390uf
                      KZH is made by United Chemi-con (brown sleeve with a little "crown" symbol).

                      All 3 caps brand and series above are quality low ESR as per

                      https://www.badcaps.net/forum/showthread.php?t=2280
                      --- begin sig file ---

                      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                      Please do not post inline and offsite as they slow down the loading of pages.

                      --- end sig file ---

                      Comment

                      • itek
                        Senior Member
                        • Aug 2010
                        • 65

                        #12
                        Re: Viore 26" LCD TV Backlight Inverter issue

                        thank you very much retiredcaps for being so helpful, i'll check the mosfets tomorrow morning an post results.

                        Comment

                        Related Topics

                        Collapse

                        • Cornito
                          Thomson 50UD6306 (TCL) Backlight Issue, starts then stops, led changed
                          by Cornito
                          Hello Team,

                          I'm back with another backlight issue that I thought was simple, but it turned out to be more complex than expected.

                          Let me provide a brief history: The TV was working well, then one day, the backlight started and shut down. I thought I had an LED issue leading to this behavior, so I replaced the LEDs with brand new ones. However, the issue remains the same.

                          Next, I replaced the electrolytic capacitors attached to the LED power supply, but the results were the same. I then replaced the driver, a OB3365RP, and did it twice due to the same result....
                          08-08-2024, 08:09 AM
                        • cheebster
                          iPad Pro 12.9 5th Gen Backlight Issue
                          by cheebster
                          Hello, got an iPad Pro A2378 12.9 5th gen with no backlight. Got another test unit without screen, tested the screen, still no backlight with the test unit.
                          Figured out the backlight on the screen was bad, ordred a new backlight from mobilesentrix, *carefully replaced it* without damaging the lcd, oh well.
                          Final result, issue is still there, the screen has no back lights. So i'm back to square one, with 3 hours less and 100$ out, issue still on the screen.
                          The panel is still ok, i can see the apple in the middle of the screen when it kicks in, just no backlight.
                          Anyone...
                          05-20-2025, 09:17 AM
                        • Cornito
                          TCL 65C715 backlight issue
                          by Cornito
                          Hello team,

                          I'm back with another topic.
                          It's a 65C715 TCL tv with backlight issue.

                          But the problem is a bit strange.
                          When I took this tv from the marketplace backlight didn't work but picture was ok.
                          Back at home I checked with led tester if led are alive and I can find something different in term of voltage supply => nothing

                          Putting all back together the tv worked fine for weeks. => Contact issue??

                          Few moment later the tv has started to have backlight issue back, turning off and on worked sometimes and tv was working....
                          06-09-2024, 02:24 AM
                        • shellybelly
                          Razer Blade 2016 6700k 1060 RZ09-01952 suspected backlight power rail issue.
                          by shellybelly
                          Back Story
                          I just recently purchased a RZ09-01652 Razer Blade 14 Touch v4(2016) as a project. I suspect the original motherboard had overheated and caused board damage to the vrm's for the CPU and GPU as now that motherboard works however will lockup on you often due to hardware clock issues.
                          So after some research and looking at options for replacement motherboards I got a replacement RZ09-01952 razer blade 14 motherboard which has the 1060 vs the 970m that was in my original motherboard. I have contacted the seller about the motherboard being bad however I doubt they will be...
                          08-27-2023, 10:40 PM
                        • Riananyaina
                          MacBook A1708 820-00840-A backlight issue
                          by Riananyaina
                          Hello Everyone ,

                          today I'm coming to you regarding my issue which is no Backlight .

                          I have image on my screen but no light .

                          The macbook was one that I bought few month ago that I used with an external screen . Now I started to do some analysis on the MB which my limited knowledge .
                          First thing is that it suffered from liquid damage . The fuse was not ok when I openned it the first time . But I already changed it after testing that there is no short to ground on this line .

                          Please find below few informations which can help for the analysis...
                          04-24-2023, 05:03 AM
                        • Loading...
                        • No more items.
                        Working...