Vizio Flex Cable / Address Bar Repair

[Grasshopper2Ant]

Vizio V755-G4 LED

Doing backlight LED strips replace. All good till I decided to clean the screen with the address bar taped to screen.

I accidentally dislodged the flex cable on the LED screen.

I was choked after reading it was a pain to repair.

Anyone out there have a solution for a layman without a bonding machine.

I saw a square heating attachment to solder iron but have no idea where to get it.

Any suggestions appreciated.

I was so close to getting this damn thing assembled.

[Grasshopper2Ant]

Re: Vizio Flex Cable / Address Bar Repair

Here is the flex cable that I tore off.

[diif]

Re: Vizio Flex Cable / Address Bar Repair

It looks like one side came off clean but it tore the the other side ?

[Grasshopper2Ant]

Re: Vizio Flex Cable / Address Bar Repair

Sorry for the bad pic. It tore off clean. The flex ribbon is in tact.

After some reading, I have to use ACT remover (G-450 product) to remove the film on the traces.

Does any know what I can use as a sustitute. Would acetone work as it is more readily available or any other

Is this pic any better?