Sony XBR-55X900F No picture, no sound no backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Storyteller12
    Badcaps Veteran
    • Jun 2020
    • 625
    • USA

    #41
    Re: Sony XBR-55X900F No picture, no sound no backlight

    Originally posted by nomoresonys
    Nice save, how much are those mainboards? wonder if they have them for the 900C.
    There's a guy who's sells the Emmc programmed for the 55” an 65” for $50. For some reason he sells the 75” for $200.
    If you have hot air station might be a good deal.

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12328
      • U.S.

      #42
      Re: Sony XBR-55X900F No picture, no sound no backlight

      I definitely think that would have worked Storyteller, but my dumb ass overheated my board and killed it completely.

      Comment

      • Nicktronic
        Badcaps Veteran
        • Mar 2023
        • 247
        • Canada

        #43
        Re: Sony XBR-55X900F No picture, no sound no backlight

        Originally posted by nomoresonys
        Nice save, how much are those mainboards? wonder if they have them for the 900C.
        The one I got was a refurb and it was almost $200. If I knew the EMMC was available I might've considered it, but I'd be worried about board damage as well as I don't have alot of experience with hot air and chip replacement. Something to work on though!!

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12328
          • U.S.

          #44
          Re: Sony XBR-55X900F No picture, no sound no backlight

          Thanks Nicktronic, as fast as these eMMC's are dying, I think I'll let this one go, this one is edge lit, not my favorite type.
          Last edited by nomoresonys; 04-30-2023, 05:14 AM.

          Comment

          • Nicktronic
            Badcaps Veteran
            • Mar 2023
            • 247
            • Canada

            #45
            Re: Sony XBR-55X900F No picture, no sound no backlight

            Originally posted by nomoresonys
            Thanks Nicktronic, as fast as these eMMC's are dying, I think I'll let this one go, this one is edge lit, not my favorite type.
            Sometimes you just have to say enough is enough lol.

            I don't know if it's appropriate or not to ask in this thread, but does anybody have any reading material suggestions i can pick up to educate myself? Specifically to do with T-Con/Panel operation and troubleshooting (LED/LCD/OLED only). I keep seeing this Kent Liew guy pop up.

            https://www.lcdrepairguide.com/

            Don't know if it's worth it or not...

            Comment

            Related Topics

            Collapse

            Working...