Epson VS250 Projector Lamp Not Working.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • platinumsteel
    Badcaps Veteran
    • May 2019
    • 234
    • Trinidad&Tobago
    #1

    Epson VS250 Projector Lamp Not Working.

    Hi guys gooday i have a Epson VS250 Projector that turns on and is also being recognized and detected by the computer when i plug the hdmi cable.The only issue the projector lamp is not working .Are these lamps repairable ? Or i should just forget repairing the lamp and just buy a replacement. Thanks
    Attached Files
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4426
      • United Kingdom
      #2
      Re: Epson VS250 Projector Lamp Not Working.

      If the status light is flashing blue and lamp light is orange, this indicates that there is a problem with the projector lamp. Check if the lamp bulb is burned out, broken, or seated improperly
      https://www.ifixit.com/Wiki/Epson_VS250_Troubleshooting

        Comment

        • platinumsteel
          Badcaps Veteran
          • May 2019
          • 234
          • Trinidad&Tobago
          #3
          Re: Epson VS250 Projector Lamp Not Working.

          thanks for the troubleshooting guide.The status light isn't flashing and the lamp light is just plain off. I opened the lamp and am not seeing any signs of burnt markings or it being broken.So i think it's safe to assume the Lamp proably just reached end of life.So i will get a replacement and see how it goes from there. Thanks a lot for the suggestions Pete.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • vestaviascott
              Epson 5040UB Projector No Lamp Strike Stuck in Startup - Blinking Status/Lamp Lights
              by vestaviascott
              Hoping someone here can put me on the right track. I'm trying to troubleshoot/flowchart the "internal projector error" on my newly acquired Facebook Marketplace bought Epson 5040UB projector (3LED, not DLP). Owner said it needed new lamp, actually error code blink pattern indicates "Internal Projector Error, call Epson support". Unit is out of warranty as of 8/19

              Here's what happens:

              1) Power on
              2) Blue power indicator lights and the lens cover motor opens the lens cover, light fan noise heard
              3) Blue status light flashes for appx 4 minutes...
              07-29-2020, 06:08 AM
            • lafilipczyk
              lc 80le632u - Lamp error - TV working after counter reset via buttons
              by lafilipczyk
              Hello everyone, I just got my hands on a Sharp lc 80le632u TV that initially had the 1 short, 1 long blink sequence. That indicates a lamp error, however if I follow the isntructions to reset the error counter, the TV starts correctly: no missing LEDs everything lods just fine.

              I went through the process to get to the diagnostic screen, and got this ( attached).

              Since all LEDs are working correctly, and the TV seems to load fine after reset, that tells me that the power board and the LED strips are working correctly. Could this be a main board issue?

              Any...
              1 Photo
              07-29-2024, 11:00 AM
            • magnetepazzo
              epson emp-x52 projector lamp temp fail
              by magnetepazzo
              Hi Guys i have this projector emp-x52 when power on the fan spin and lamp go on but after few seconds lamp go off and led temp flashing with fan at maximum speed. I have check the 2 termal temp but are good are 12.51 Kohm. Have suggestion for me ? TKS
              04-23-2021, 03:37 AM
            • narf
              Epson EB-U42 projector / Caps with 0.7 ohms ?!
              by narf
              hi all,

              first of all: i'm a (motivated) newbie, so please forgive me any stupid question i may or may not ask

              i'm currently repairing a projector: Epson EB-U42 that doesn't start (no lights, nothing).

              what i've found so far:
              - the PSU does its job and supplies 12V to the mainboard via the connector.
              - shortly thereafter, there is a mosfet (TS420-600B) where i can test 12V on the one side (in the data sheet this side is called Anode), Gate 0V, Kathode shorted to ground
              - not far away, there's the first cap with a resistance of 0.7 ohms....
              07-02-2024, 03:53 PM
            • EVAN STUARTS
              Epson eb-e 01 projector
              by EVAN STUARTS
              Hallo guys I need some help with this Epson projector I turn it on but it stops at power light it does not switch on
              Pliz help guyz
              04-25-2023, 09:46 AM
            • Loading...
            • No more items.
            Working...