Announcement

Collapse
No announcement yet.

Sony Bravia XBR 55X900E cycling through test patterns: which board(s) to replace?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sony Bravia XBR 55X900E cycling through test patterns: which board(s) to replace?

    We had a power outage but TV seemed to be working fine afterward. This morning it showed a "grainy" picture, and then next time we turned it on it's stuck in a test-pattern loop. None of the resets I've tried have any effect, including unplug/wait/plug in - it immediately goes into this cycling test pattern.

    Does this suggest the main board needs replaced? The TV is about 5 years old, picture still looks great (tho limiting to crisp red/green/blue/white lacks some variety
    Attached Files

    #2
    Re: Sony Bravia XBR 55X900E cycling through test patterns: which board(s) to replace?

    Try a firmware update/pair thru usb, try to use a thumb drive of 4gb or less.
    Last edited by nomoresonys; 04-08-2023, 07:39 AM.

    Comment


      #3
      Re: Sony Bravia XBR 55X900E cycling through test patterns: which board(s) to replace?

      When changing air tv channels have you got any sound? My first doubt is bad main board, there is a lack of video signal through lvds cable, if you have oscilloscope you can check, you can also try a checking with multimeter, if you change mb you must do a pairing by usb update

      Comment

      Working...
      X