Anyone recognise this emmc programming software and device ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • imran333
    Member
    • Apr 2012
    • 48
    • uk
    #1

    Anyone recognise this emmc programming software and device ?

    I saw this software on a foreign forum where you have to pay to get advice but the website doesn't seem great when translated and hardly anyone speaks English there, I saw this software they use for programming the emmc on Sony android boards but can't figure out what device or software it is, here's a picture of the software and maybe someone knows what it is ?
    Attached Files
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4809
      • Russia
      #2
      Re: Anyone recognise this emmc programming software and device ?

      The photo shows the software shell of the TNM 5000 programmer.

      https://tnmelectronics.com/download/

      https://www.youtube.com/watch?v=hpzcWHlqukM

        Comment

        • imran333
          Member
          • Apr 2012
          • 48
          • uk
          #3
          Re: Anyone recognise this emmc programming software and device ?

          Originally posted by lotas
          The photo shows the software shell of the TNM 5000 programmer.

          https://tnmelectronics.com/download/

          https://www.youtube.com/watch?v=hpzcWHlqukM
          Thanks for that, I was hoping it would be a lot cheaper than that, it's out of my price range, I've got RT809H and wanted something maybe better, Easy jtag is way too expensive aswell

            Comment

            Previous template Next

            Related Topics

            Collapse
            • EazyBone
              Hisense 55H8F Emmc programming help
              by EazyBone
              I am extremely new to programming and dipping into this. I picked up a XGECU T48 Programmer and have the correct socket for EMMC.
              I took the EMMC off a working main board with no problems and threw it into the programmer. I click analysis IC and it gives me a report (attached) of the current EMMC. Model H26M41204HPR

              1) I manually found this chip(above model number) in the select IC section of the XGPRO 12.xx programmer software and it had a option for 4 bit and 1 bit. I chose 4... is this correct?

              2) In the options section point number 2 operation says "30...
              5 Photos
              06-11-2024, 06:03 PM
            • CornholioGSM
              RT809H - direct read Toshiba eMMC timeout error
              by CornholioGSM
              Hello all,
              help needed.
              I want to made backup of boot and all partitions from emmc desoldered from old phone.
              So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
              In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).

              Problem is, that i still get Read Timeout Error

              OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.

              So...
              01-16-2025, 04:34 PM
            • BOSCHNJAK
              looking for programming software for board ETON.ET866 1302.2Z2
              by BOSCHNJAK
              I am looking for programming software for board ETON.ET866 1302.2Z2. This PCB is built into the Switching Power Supply from ACBEL model FSA011 and I need information on how to program that PCB, On the board there is a small connector with 5 pins.
              I need a programmer or emulator to access this board and adjust the voltage from 12.2 volt DC to 13.8 volt DC.
              Can anyone help? Pictures attached.
              3 Photos
              12-27-2023, 04:14 AM
            • Richi_el
              EMMC programming BGA 169 (ANDROID SOFTWARE)
              by Richi_el
              Hi,
              i have a problem with a device wich is not starting --> issue a damage on the Emmc 7 GB Micron flash. (see in pic 1)

              i have desolderd a healthy Emmc and the plan is to put in into my progamming device i try to make a Image of the whole Software on BGA.
              (see on pic2)

              Afterwards i want to burn a new EMMC Bga to resolder it on the device.

              I can read the media inside the healthy Emmc with linux reader software for win7 called diskinternals (see on pic 3) but even when i try to make an image with HDCLONE oder each other programm it...
              01-06-2019, 12:48 PM
            • Document Archive
              Acer Aspire Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) Notebook 1 Specification for Upgrade or Repair
              by Document Archive
              This specification for the Acer Aspire Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) boardview and Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10...
              09-06-2024, 10:00 PM
            • Loading...
            • No more items.
            Working...