Hello all,
help needed.
I want to made backup of boot and all partitions from emmc desoldered from old phone.
So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).
Problem is, that i still get Read Timeout Error
OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.
So can anyone help me where can be problem?
It is emmc Toshiba THGBMBG8D4KBAIR (32GB).
https://download.s21i.faiusr.com/107...f&v=1699263574
Thank You
help needed.
I want to made backup of boot and all partitions from emmc desoldered from old phone.
So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).
Problem is, that i still get Read Timeout Error
OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.
So can anyone help me where can be problem?
It is emmc Toshiba THGBMBG8D4KBAIR (32GB).
https://download.s21i.faiusr.com/107...f&v=1699263574
Thank You
Attached Files