Anyone recognise this emmc programming software and device ?

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • imran333
    Member
    • Apr 2012
    • 48
    • uk

    #1

    Anyone recognise this emmc programming software and device ?

    I saw this software on a foreign forum where you have to pay to get advice but the website doesn't seem great when translated and hardly anyone speaks English there, I saw this software they use for programming the emmc on Sony android boards but can't figure out what device or software it is, here's a picture of the software and maybe someone knows what it is ?
    Attached Files
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4503
    • Russia

    #2
    Re: Anyone recognise this emmc programming software and device ?

    The photo shows the software shell of the TNM 5000 programmer.

    https://tnmelectronics.com/download/

    https://www.youtube.com/watch?v=hpzcWHlqukM

    Comment

    • imran333
      Member
      • Apr 2012
      • 48
      • uk

      #3
      Re: Anyone recognise this emmc programming software and device ?

      Originally posted by lotas
      The photo shows the software shell of the TNM 5000 programmer.

      https://tnmelectronics.com/download/

      https://www.youtube.com/watch?v=hpzcWHlqukM
      Thanks for that, I was hoping it would be a lot cheaper than that, it's out of my price range, I've got RT809H and wanted something maybe better, Easy jtag is way too expensive aswell

      Comment

      Related Topics

      Collapse

      • EazyBone
        Hisense 55H8F Emmc programming help
        by EazyBone
        I am extremely new to programming and dipping into this. I picked up a XGECU T48 Programmer and have the correct socket for EMMC.
        I took the EMMC off a working main board with no problems and threw it into the programmer. I click analysis IC and it gives me a report (attached) of the current EMMC. Model H26M41204HPR

        1) I manually found this chip(above model number) in the select IC section of the XGPRO 12.xx programmer software and it had a option for 4 bit and 1 bit. I chose 4... is this correct?

        2) In the options section point number 2 operation says "30...
        06-11-2024, 06:03 PM
      • Richi_el
        EMMC programming BGA 169 (ANDROID SOFTWARE)
        by Richi_el
        Hi,
        i have a problem with a device wich is not starting --> issue a damage on the Emmc 7 GB Micron flash. (see in pic 1)

        i have desolderd a healthy Emmc and the plan is to put in into my progamming device i try to make a Image of the whole Software on BGA.
        (see on pic2)

        Afterwards i want to burn a new EMMC Bga to resolder it on the device.

        I can read the media inside the healthy Emmc with linux reader software for win7 called diskinternals (see on pic 3) but even when i try to make an image with HDCLONE oder each other programm it...
        01-06-2019, 12:48 PM
      • CornholioGSM
        RT809H - direct read Toshiba eMMC timeout error
        by CornholioGSM
        Hello all,
        help needed.
        I want to made backup of boot and all partitions from emmc desoldered from old phone.
        So i have wired emmc directly to RT809h - Dat0, GND,CMD, CLK, VCC, VCCQ - on programmer sw set Smart Identify to EMMC ISP and voltage to 3.3V.
        In Settings (N) i have set area to user, boot1,boot2 and EXT and vccq set to 1.8V (tested 3.3V too).

        Problem is, that i still get Read Timeout Error

        OK - emmc can be dead...so i have tested emmc wires connection to micro SD adapter and then in card reader and emmc was detected.

        So...
        01-16-2025, 04:34 PM
      • BOSCHNJAK
        looking for programming software for board ETON.ET866 1302.2Z2
        by BOSCHNJAK
        I am looking for programming software for board ETON.ET866 1302.2Z2. This PCB is built into the Switching Power Supply from ACBEL model FSA011 and I need information on how to program that PCB, On the board there is a small connector with 5 pins.
        I need a programmer or emulator to access this board and adjust the voltage from 12.2 volt DC to 13.8 volt DC.
        Can anyone help? Pictures attached.
        12-27-2023, 04:14 AM
      • Document Archive
        Acer Aspire Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) Notebook 1 Specification for Upgrade or Repair
        by Document Archive
        This specification for the Acer Aspire Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10 in S Mode, Office 365 Personal, Blue) boardview and Acer Aspire 1 A114-32 14 inch Laptop (Intel Celeron N4020, 4GB RAM, 64GB eMMC, HD Display, Windows 10...
        09-06-2024, 10:00 PM
      • Loading...
      • No more items.
      Working...