Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Update: before leaving home, I have managed to swap the main board and now I have the image back! Yeey ! So the main board was damaged. But I still get the lines. If I remove one of the u ribbon I get the following image.
I will have to try your method of masking the 8 subsequent pins tomorrow.
Picture 1 - without removing the flex ribbon
Picture 2 - with the flex ribbon removed
Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Collapse
X
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
the main board is goodLeave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
I understand. Going from left or right to the middle of each cable. 8 at once. Should I try that before swapping the main board ?Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
yes, clearly a panel defect, the same and today old gate driver defect.. only masking tape can work
you must mask a series of 8 subsequent pins on one of the two flat cables starting from the outer side, at randomLast edited by Davi.p; 02-24-2023, 10:40 AM.Leave a comment:
-
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Not that I know off. After getting so much information from here, my good guess is that he ( the local tech )has probably tried to fix it by working with the u ribbon cable and eventually totally damaged the main board. That's why my tv went from normal image but with horizontal stall lines to full blue.Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
no, i asked which code he has searched, if the good one or not.. BN94 is the good one..
my curiosity, has someone done house works , using heavy tools, drills , demolitions and so on the days the defect happened?Last edited by Davi.p; 02-24-2023, 07:06 AM.Leave a comment:
-
-
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
but which code, BN41- or BN94- ?Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
As i said, i am no professional but is more likely the mainboard as it is what controls the signal output to the screen via the LVDS.Last edited by gbbradshaw; 02-24-2023, 06:20 AM.Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Bought from one of the biggest suppliers for spare tv parts, with warranty and return in case this is not going to fix my issue. Happy daysLeave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
.. so you bought a main board at random? well, shipping companies will smile..
Which code you have searched?
Anyway PCB= printed circuit board; PSB= power supply board; PB= Power board.... aaaah! These acronyms!Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
I’m pretty sure it’s the panel that’s bad. I don’t think mainboard is going to fix it. As I mentioned a lot of he TU series have bad panelLeave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
My bad then, when I say PCB I refer to a board with the whole circuitry/components, whereas when I use PWB, I simply mean the power board. So yeah, I bought the main board.Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
PCB = PWB= Power circuit Board
you mean MB Main BoardLeave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Terminology, pcb=printed circuit board, includes powerboard and mainboard, just call them what they are mainboard has the video/audio inputs, powerboard supplies the power.Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
I am not sure where did you read that I bought the PWB ? I said I bought the PCB board , hopefully will put my hands on it tomorrow. Why? Because there was nothing else to try. Where? Ebay. Lucky, I know, only one piece on the whole ebay.Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
replace PCB.... !!! why and where you got so fast PWB replacment LOL....
what had blue screen to do with PWB !!!!Leave a comment:
-
Re: Samsung 65" UE65TU7000KXXU VER:02/UTU7000 TV Blue screen
Will replacing the pcb board but (theoretically) having bad u ribbon or lvds cable , damage it again?Last edited by gbbradshaw; 02-23-2023, 08:06 AM.Leave a comment:
Related Topics
Collapse
-
by mar1inHi everyone,
I've got this Samsung here that would be stuck in a boot loop.
After opening up and doing the tape block method, I was able to get it to turn on and play sound from the HDMI input, but with a blue screen.
Does that mean there is another combination of pins that I need to block in order to get a picture, or is there something more serious, faulty mainboard or faulty panel?
Thanks in advance -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
by ChrissygizmoHello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same... -
by ChrissygizmoHi , I've recently replaced the screen in my Samsung galaxy ao2s, at first it wouldn't even turn on, it had the charging symbol on the screen when plugged in but the green circle wasn't going around to show it charging....
Ive eventually managed to get it on and working but it's very temperamental...
The battery icon always reads as 50% , when the phone goes into lock screen mode i sometimes can't get the screen back on unless I plug the charger in to get it to light up, also it keeps putting the camera app on.. u think it could be something to do with the side buttons. ...05-26-2024, 12:05 AM -
by bohabohaHi it looks like everything works don't know where to test except the 390v in the 2 capacitor in the hot side of the power supply and the weird 180v in the diodes in the cold side that should be discharged it is writin on the circuit no more you can read what is written on the circuit quite srrange color mixiing yellow and white
anyhow i couldn't t read anything else
the backlight is on strong and the screen does not get dark or very dark but no pictures
the mainborad feels a bit hott on the black part i test it to 52 degree's against 34 to 40 on the rest of it
... - Loading...
- No more items.
Leave a comment: