-
-
Re: Pantum P2502W Toner Reset Chip help
tell me what the command should be to change the serial number 00 AC FF 04 00 00 00 00 00 00 00 00 00 00 00
hello, please help me deal with the Pantum printer, I'm interested in the ACL command AclSetSerialNumber 0xFF04, what should the command look like? look at an example of a file in hex and tell me where the error is 1B 25 2D 31 32 33 34 35 58 40 50 4A 4C 20 45 4E 54 45 52 20 4C 41 4E 47 55 41 47 45 3D 41 43 4C 0D 0A 00 AC FF 04 43 4C 31 39 39 32 30 37 31 38 30 30 1B 25 2D 31 32 33 34 35 58Last edited by SMDFlea; 08-07-2023, 03:12 AM.Comment
-
-
Re: Pantum P2502W Toner Reset Chip help
in final can any one help to change Serial number of pantum printer like hp with that file
%-12345X@PJL
@PJL SET SERIALNUMBER=Z5KZBJFD100033J
%-12345X
or notComment
-
Brother Please Provide Me Pantum P2506w Printer Firmware. I Need Help.badly Please Help MeComment
-
Hello guys i wanted to ask i have a modify firmware for pantum printer 2509w and the file have .FWR extension but it has the printer id so it can only be flashed on one printer with the same id printer in the file.
my question is can i edit the printer id in the file and use it in other printers and how can i do itComment
-
swf plaseÖrnek P2500w Seri numarası CM6U008511 Güncel versiyon 3.A.1.7 Motor versiyonu 2.A.1.3 Hafıza 128MB Program sürümü 5.8 Comment
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
for all printer and firmware modification experts
I've been working on the above named printer toner chip trying to read with ch341a and other devices but seemingly the chip burns after a while and needs to be replaced and printer doesnot get ready
anyone can help about this printer chip or firmware modification ways
...
08-16-2022, 09:07 AM -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Long story short:
- dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
- gave the computer to his son a couple years later
- son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
- too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
(seems like the story was not that short)
He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8... -
Hello, anyone here have updated ezp2023+ chip database in .dat file format.
I need to add w25q256jveq chip but I do not know what data should I type.
I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers
The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....11-25-2024, 12:53 AM
Comment