Canon TS6151bin files
25Q64CSIG
25Q127CSIG
25Q64CSIG
25Q127CSIG
-
Hi all,
I need the BIOS (bin files) to re-flash the BIOS chips on a toshiba laptop.
Why I am pretty sure I need this to repair?
1) Power supplies seem OK.
2) Battery has been replaced, is charging well ... also not the CMOS battery CR2032, also not OK without RAM, or 1 or the 2 RAM modules (RAMS are OK).
3) Laptop does really rare (seems random things) with the 3 leds (power, net, ...)
4) In the past, when trying to restart 100 times via power button, it was sometimes succeeding, now no more.
... -
Hello. I am trying to revive an old notebook (HP 650; C1N06EA#ABD) which has a corrupted BIOS. I downloaded the BIOS updater-installer from HP website and extracted the contents but in there I am stuck with two .fd files (each 5.602 KB) which seem to be encrypted. I looked at the guides but I don´t know how to decrypt these files to get a flashable .bin out of it. Can someone help with this? The files in question are attached.... -
Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...05-07-2025, 12:26 AM -
Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.04-15-2025, 02:43 PM -
I was fortunate enough to be given bvr and schematic files for these two boards yesterday. The board files are not available unfortunately, so please do not ask. Both FBV and OBV will open bvr files. Happy repairs and thanks to our benefactor who is generously supplying the community with these very late model files....