Canon TS6151bin files
25Q64CSIG
25Q127CSIG
25Q64CSIG
25Q127CSIG
-
Hi all,
I need the BIOS (bin files) to re-flash the BIOS chips on a toshiba laptop.
Why I am pretty sure I need this to repair?
1) Power supplies seem OK.
2) Battery has been replaced, is charging well ... also not the CMOS battery CR2032, also not OK without RAM, or 1 or the 2 RAM modules (RAMS are OK).
3) Laptop does really rare (seems random things) with the 3 leds (power, net, ...)
4) In the past, when trying to restart 100 times via power button, it was sometimes succeeding, now no more.
... -
Hello,
I have an HP EliteBook 840 G6 with the following details:- PROD ID: 4WG30AV
- Serial Number: 5CGO28HLD
- Motherboard model and revision: currently unknown, as I have not disassembled the laptop.
The laptop does not power on due to what I believe is a BIOS issue. I am looking for the two BIOS files for this model, approximately 16 MB and 32 MB, to reflash the BIOS chip directly using a programmer.
I have already checked the official sources and several forums but could not find these files for free. If anyone could provide these BIOS files or guide me to... -
Hi guys, I want to try revive a motherboard for a hisense 55 that only lights up the motherboard. does any one have the emmc files ? any help is appreciated. i have seen the emmc pinout on kenotrontv https://kenotrontv.ru/files/file/746...ag78207918roh/08-18-2025, 03:57 PM -
Hi all,
since my second device of this model number now died due to Canon being service unfriendly, I'd like to reset the counter myself.
This model of printer seems to be on non of the eBay sellers and other suppliers support lists for the Canon Service Tool. Other forums suggested the v5103 version of the tool, which did not work unfortunately.
Has anyone maybe experience with this exact model?
Thank you!07-02-2025, 07:46 AM -
Hello. I am trying to revive an old notebook (HP 650; C1N06EA#ABD) which has a corrupted BIOS. I downloaded the BIOS updater-installer from HP website and extracted the contents but in there I am stuck with two .fd files (each 5.602 KB) which seem to be encrypted. I looked at the guides but I don´t know how to decrypt these files to get a flashable .bin out of it. Can someone help with this? The files in question are attached....