Hello. Brought Sony PS5 with a malfunction does not turn on. Found that the power supply is not working. No visual defects were found. Full fuse. Capacitors C2, C5 are charged (voltage comes to them). Does anyone have a diagram or can you please tell me how to fix it. Little experience with power supplies. I will be glad for any of your help. Thank you.
-
-
Re: PS5 power supply not working
DAP 0537 gets very hot. I wanted to order from Aliexpress, but there is no such thing. Are there any analogues of this chip? Thanks. -
Re: PS5 power supply not working
Re check the number I think it is a DAP 053T , This is the APFC/PWM controller ic
I also found this which might help
Also the DAP053T seems to be a TEA2016AAT/1JAttached FilesLast edited by R_J; 12-16-2022, 08:31 PM.Comment
-
-
Re: PS5 power supply not working
Thank you very much. I will check, I will give you an answer later.Comment
-
Re: PS5 power supply not working
These are the readings on my power supplyAttached FilesComment
-
-
Re: PS5 power supply not working
It is unclear how to check EL 1013? Like a regular diode between 1 and 2 pins, and 3 between 4 pins? Tell me please.Comment
-
Re: PS5 power supply not working
Maybe this will help you as pinout ..Attached FilesComment
-
-
Re: PS5 power supply not working
ll46 1004 wComment
-
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
Opened it up and discovered the power supply is making a faint clicking or ticking sound.
I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles... -
Dear forum members,
I'm working on this power supply for ps4 slim, that behaves in a similar manner as other cases but I can't find a way to solve the problem.
When it came to me, externally the ps4 had standby voltage, clicking the disc eject button made the triple beep (without disc inside) and cliking on the power button made the blue power light turn on and then all turned off within 1 second.
When I opened it up, I found these components shorted:
Q6 24N60M2
IC41 1612A (not really shorted but had a hole on it and all pins measured open circuit but the 9th... -
Hello Everybody,
Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)
Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).
The outputs marked 12v and 20v are all measuring only 1v.
The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.
The capacitors physically look clean (no bludgesor leaks) and...
Comment