PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

[lotas]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

The mosfet can be shorted too, all those 3 pins (6,7,8) go through low ohm resistors to the mosfet.
Or are you confused with pins (8,9,10)?

[Norrecito]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

The mosfet can be shorted too, all those 3 pins (6,7,8) go through low ohm resistors to the mosfet.
Or are you confused with pins (8,9,10)?

Nice catch

I have noticed this yesterday but seems like my edit didn't go through.

The shorted pins are:
10 - pfcOK (5 ohms to GND)
8 - DRV (1.2 ohms to GND)
7 - GND

The MOSFET isn't shorted, I have desoldered and tested it before.

[Norrecito]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

The IC has finally arrived and I had some time to replace it.

The results are amazing, the PSU now works perfectly and even the PS4 starts with it. It displays an image mentioning that it could not find the storage. The HDD is busted (because of the same fall that damaged the PSU), not even my PC recognizes it.

Thanks for the help guys, I could not done it wothout you!

[Master it]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

https://www.youtube.com/watch?v=sx0oBXsueFk

Hope to help u

[sam_sam_sam]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

https://www.youtube.com/watch?v=sx0oBXsueFk

Hope to help u

Thanks for sharing this video information very informative

[Fico_m1]

Hello, I have a power supply PS4 PRO model ADP-300FR.
The part around the fet is gone, I'm wondering if anyone has a picture of this part of the power supply to see the resistor R99 and diode D63 markings?
Thanks a lot.

[psina]

r99 =10k,,zener = 5d-7 (zener 7v?)

[sam_sam_sam]

Re: PS4 pro PSU (ADP-300FR) shuts down when turning on 12V

https://www.youtube.com/watch?v=sx0oBXsueFk

Hope to help u

Well done video