hi guys,i been looking around to find this part number but find diferent info and kind of getting confuse....can you tell me exactly what part it is and with what can i replace it with.(a1772) on 1st photo you see the burn part that seem to be a power mosfet.
Aquatec Orca 84/13 BS IMH need info on this part
Collapse
Related Topics
Collapse
-
by the_remHello guys,
I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.
I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow... -
by PizzaManI am trying to find this part on the logic board. See pictures below. It might be CR812, not sure. Any help would be appreciated. And where could I find the part?3 Photos
-
ms-16r41 rev 1
PU7
ANYONE HELP ME TO FIND THIS COMPONNET...(PU7)
I MISSING THIS PART RECENTLY..
I NEED TO FIND IC MODEL..AND SIMILER PART..
PHOTOS ATTACHED
THANKS...
-
by tech_guruHello everyone.
Is there any chance somebody can find the part number of this chip or equivalent, in the attached photo?
It is from PS5 EDM-020 board, in the front usb section, near F3502.
It must be a Richtek ic, vqfn32 package style.
Thank you in advance....05-27-2024, 01:37 AM -
by edugimenoHi There!
I'm trying to help my friend who owns a restaurant be just bought.
He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
It's stuck using, I guess, the 2 sided tape that comes with the strip
The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth... - Loading...
- No more items.
Comment