Help identify there parts in Enermax EG365P-VE 5VSB circuit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • POM_MJ
    Badcaps Veteran
    • Aug 2009
    • 228
    #1

    Help identify there parts in Enermax EG365P-VE 5VSB circuit

    I've got an Enermax EG365P-VE that had damaged in 5VSB circuit.

    1. 5VSB switcher mosfet was broken, can not read part number clearly.
    preced by K3, missing 2 number and last one is 7 (K3??7)

    2. two resistors was burned and a diode was broken, red circled them.

    Please help me identify there part.
    Thankyou in advance.
    POM





    Attached Files
    | AMD Phenom II X2 550BE | GIGABYTE GA-MA790FXT-UD5P | GeIL DDR3 Ultra 2x2GB 1600C7 |
    | XFX GTS250 DDR3 512MB | Dell H525EF-00 | Lancool PC-K62 Black | Samsung 2232GW |
    | 2xWD7500AYYS | 2xHD322GJ Raid0 |
    Tags: None
    • Khron
      Badcaps Legend
      • Sep 2006
      • 1350
      • Finland
      #2
      Re: Help identify there parts in Enermax EG365P-VE 5VSB circuit

      You can start searching HERE . At most, 100 part numbers to check out (missing numbers from 00 to 99).

      Good luck!
      Khron's Cave - Electronics - Audio - Teardowns - Mods - Repairs - Projects - Music - Rants - Shenanigans

        Comment

        • POM_MJ
          Badcaps Veteran
          • Aug 2009
          • 228
          #3
          Re: Help identify there parts in Enermax EG365P-VE 5VSB circuit

          HA HA! don't need to play lotto.
          I found the small missing piece of the mosfet drop on the floor, It is K3067.

          and from this thread by I4004 => https://www.badcaps.net/forum/showth...hlight=enermax

          5VSB pictures store on picasaweb => http://picasaweb.google.hr/i4004b3/E...55vStbySection

          R16 is 620ohm, another one is 39ohm
          Thanks to i4004

          from many schematic around here, the diode might be Zener diode 18V.
          | AMD Phenom II X2 550BE | GIGABYTE GA-MA790FXT-UD5P | GeIL DDR3 Ultra 2x2GB 1600C7 |
          | XFX GTS250 DDR3 512MB | Dell H525EF-00 | Lancool PC-K62 Black | Samsung 2232GW |
          | 2xWD7500AYYS | 2xHD322GJ Raid0 |

            Comment

            • py924
              New Member
              • Jun 2011
              • 2
              #4
              Re: Help identify there parts in Enermax EG365P-VE 5VSB circuit

              Originally posted by POM_MJ
              I've got an Enermax EG365P-VE that had damaged in 5VSB circuit.

              1. 5VSB switcher mosfet was broken, can not read part number clearly.
              preced by K3, missing 2 number and last one is 7 (K3??7)

              2. two resistors was burned and a diode was broken, red circled them.

              Please help me identify there part.
              Thankyou in advance.
              POM





              Sir, Can you show me the value of resistance R10。THX。

                Comment

                • py924
                  New Member
                  • Jun 2011
                  • 2
                  #5
                  Re: Help identify there parts in Enermax EG365P-VE 5VSB circuit

                  Originally posted by Khron666
                  You can start searching HERE . At most, 100 part numbers to check out (missing numbers from 00 to 99).

                  Good luck!
                  Sir, Can you show me the value of resistance R10。THX。

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • прямо
                      Viper22A 5VSB circuit
                      by прямо
                      So I have a cheap non working ATX PSU that I was learning to repair a decade ago. At the time, it blew the main fuse, bridger rectifier, NTC, and primary 9A 900V MOSFET. Replaced all except the MOSFET. 5VSB came back online. Then I poked around in it so much, measuring components one by one to a point I accidentally made the 5VSB circuit primary side went bang. Blown the AP8022 (Viper22A) PWM chip, along with a low resistance resistor and the PC817 opto isolator. I replaced them all.

                      In the process of poking around, I also lost a zener diode that stabilize the voltage coming from...
                      3 Photos
                      01-13-2024, 07:05 PM
                    • hobostove
                      Corsair RM1000e - Help identify 5VSB Zener diode
                      by hobostove
                      Hey there guys. I've got a Corsair power supply that's come across my bench dead. I usually don't mess with power supplies, but it's a slow week so I'm giving it a whirl.

                      Taking it apart I heard a screw rattling around inside, and when I got it apart I found a couple blown components near what I think is the 5VSB area.

                      There's a 22ohm resistor that's melted and open, but it still has the bands.

                      The other part is a zener diode and it's top went to jesus, so I can't read the marking.

                      It looks like the diode connects the source and drain of a TNY284...
                      03-27-2025, 02:25 PM
                    • edugimeno
                      Help me identify the missing component... Sound to light circuit
                      by edugimeno
                      hI there!
                      Im trying to help a friend repairing a large, real-sized short-circuit robot.
                      This is remotely controlled and has a 2 way voice send/receive. Also while the hidden operator is talking, the red bulb inside the "mouth" should flash according to the sound
                      Some other technician used to service it and he was fired leaving all the repairs unfinished and no documentation at all.

                      What I found is a sound receiver, a speaker, and a wire directly to the mought bulb (a normal motorbike 5W 12V bulb).
                      So I bought a simple 2X30W amplifier to feed the loudspeaker...
                      02-14-2024, 10:23 AM
                    • Astonished
                      Fixing the Charge Circuit of the Batteries of the DC Motor
                      by Astonished
                      Hi friends of electronics

                      What you see in the video and pictures attached is the circuit for charging the batteries of a DC motor.

                      The problem is that this circuit cannot charge the batteries (3 1800mAH NiMH batteries) any more. When the circuit was OK, its green LEDs lit up one at a time to show that the batteries have charged more. But now that the circuit is flawed, LEDs light up as you see in the video and at the same time successive beeps are heard.

                      Please help me fix this circuit.

                      (the datasheet of the IC: https://pdf.datasheet.live/28...
                      01-28-2025, 06:24 AM
                    • rddube
                      Lenovo L490 Ram voltage circuit malfunction
                      by rddube
                      Hello friends,

                      Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.

                      I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I...
                      07-15-2025, 04:41 PM
                    • Loading...
                    • No more items.
                    Working...