RCA VCR Model#VR616HF

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ConComp
    New Member
    • Feb 2010
    • 1
    #1

    RCA VCR Model#VR616HF

    I need a schematic for the power supply of the RCA VCR Model#VR616HF.
    I think the rectifier bridge is cooked and possibly a couple of capacitors.
    There is no voltage reading beyond the regulator.

    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Steph.hen
      Bridge rectifier identification part number KPB305G
      by Steph.hen
      Hi all, a newby question about a bridge rectifier I'm trying to identify.

      I'm in the midst of reparing a battery charger in work which went pop, The bridge rectifier has shorted and took out a couple of other components. The rectifier in question has a part number KPB305G, and it looks like it's obsolete. Does any one know what I could replace it with?...
      08-29-2024, 09:52 AM
    • mpn78
      Fujitsu Q556, What capacitor for bridge rectifier?
      by mpn78
      Hello

      My Fujitsu Esprimo Q556 motherboards blew up. At least fuse, bridge rectifier and capacitor got damaged. I have changed fuse and bridge rectifier (DF1508S), but I don't know what capacitor it is (picture). I know that capacitors size is 47nF, but I don't know other specs for it. Can you help me to choose right capacitor for my motherboard?
      There is 240V AC on input side of bridge rectifier and 340V DC as output on capasitors side.

      Thanks....
      04-05-2022, 12:31 PM
    • EasyGoing1
      Reading input and output of bridge rectifier on the same scope?
      by EasyGoing1
      I have a 40 volt AC transformer that I put a bridge rectifier on, and I wanted to see the input signal and the output signal on the same screen on my scope, so I set one channel up with the test lead on one side of the input and the ground lead on the other side of the input, then I used another channel on the scope and clipped the test lead on the positive side of the output then the ground on the negative side of the output.

      When I connected the transformer to power, the wire that was connected between the ground lead on the second channel and the negative side of the bridge rectifier...
      06-26-2022, 12:52 AM
    • Ross Kohler
      Diagnosing South Bridge (FH82H370) on Asus H370-Pro Gaming Motherboard
      by Ross Kohler
      Hi,

      I'm learning about motherboard repair and I believe I've traced the issue down for the South Bridge on the particular motherboard I'm working on. My path of concluding that:
      - There's no sign of any attempt to power on when pushing the power button.
      - No PSON signal is reaching the 24-pin ATX connector.
      - The Super IO chip is receiving the PS_SWITCH signal from the power button and is relaying this signal back to the South Bridge.
      - The Super IO is not receiving the S_SLPS#_R signal back from the South Bridge
      - If I pull the Super IO S_SLPS#_R pin...
      04-16-2024, 09:36 AM
    • disorder
      HP 2311 display, 3.3v regulator fried, need help to replace
      by disorder
      hello,

      i have a hp display 2311 to repair, totaly dead
      on the board, il have 2 capacitor 470µf that are dead and the 3.3v regulator : ax6630-33
      i have no such regulator, can i replace this one with a mic5209-33 (3.3v outpout regulator too) ?

      thank you
      07-27-2025, 04:34 AM
    • Loading...
    • No more items.
    Working...