DC boost converter max power ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • joshnz
    replied
    Re: DC boost converter max power ?

    Originally posted by bianchi77
    ATX power supply
    the power supply you are using maybe 5v regulated and will need a load on the 5v rail to provide good voltage and current on the 12v rail.

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    I'm using 12V ATX power supply...the output is 11.4V
    I put fuse for protection...

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    what are you supplying this with

    if you use 330uf inductor use 15khz oscillator.
    Last edited by joshnz; 12-04-2016, 04:02 AM.

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    I'm thinking obtaining 330uH or 470uH inductor in one piece, since I'm using multiple inductors in series now, a lot flux loss down the wire, reducing efficiency a lot..

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Nearly the same result with FR107 ...216V at RL = 7K

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    Originally posted by bianchi77
    so if the output voltage is larger than diode breakdown voltage, it will reverse backward through diode...I see
    that is correct.

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    may be it will answer one of my puzzle...

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    so if the output voltage is larger than diode breakdown voltage, it will reverse backward through diode...I see

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Originally posted by joshnz
    Wasted power as it goes backwards through diode.
    Ok, I'll see your suggestion

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    Originally posted by bianchi77
    what happen if reverse blocking voltage is smaller than Vo ? will it reduce the output voltage ?
    Wasted power as it goes backwards through diode.

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    1N5822 40v not good enough
    FR107 1000v good up to 1000v will work for your application.

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Originally posted by joshnz
    fr302 = 100 reverse blocking voltage.
    you need FR304 at least.
    what happen if reverse blocking voltage is smaller than Vo ? will it reduce the output voltage ?

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Fr107 ?
    Last edited by bianchi77; 12-04-2016, 03:32 AM.

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    Originally posted by bianchi77
    Diode = FR302 on frequency 921Hz, Vo = 216V and RL=7K..
    fr302 = 100 reverse blocking voltage.
    you need FR304 at least.

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Diode = FR302 on frequency 921Hz, Vo = 216V and RL=7K..

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    What is the output diode you are using?

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    I got 234mV on Vo for 47uH and 150KHz....

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    in your drawing it shows output diode as 1N3822 is that correct?
    Your output diode will need to be fast switching type.
    Last edited by joshnz; 12-04-2016, 03:05 AM.

    Leave a comment:


  • joshnz
    replied
    Re: DC boost converter max power ?

    Originally posted by bianchi77
    so for 47uH probably 150KHz ?
    yes

    Leave a comment:


  • bianchi77
    replied
    Re: DC boost converter max power ?

    Originally posted by joshnz
    where did you get that from?
    just a guess

    Leave a comment:

Related Topics

Collapse

Working...