Dell 550w Power Supply Shorted Outputs

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • mmartell
    Badcaps Legend
    • Oct 2013
    • 3189
    • Canada
    #21
    Re: Dell 550w Power Supply Shorted Outputs

    For completeness
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        ORIGINAL POWER SUPPLY BOARD
        7 Photos
        11-22-2024, 01:46 PM
      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • guizmo1967
        Dell Latitude 5501 LA-H181P shorted power rail
        by guizmo1967
        Hello,

        This is my problem:

        Laptop: Dell Latitude 5501
        Motherboard: EDC51 LA-H181P

        I have two power rails shorted to ground, +1.0V_PRIM and +3.3V_ALW_PCH. I removed solder on PJP302, +1.05VALWP (pad1) not shorted but +1.0V_PRIM (pad2) shorted.

        I also cleaned PJP38, pad1 not shorted, pad2 (+3.3V_ALW_PCH) shorted to ground.

        I measure the resistance of all the coils on the motherboard and they all were not shorted to ground except coil PL301 before I removed the solder on PJP302.

        I injected +1.05V - 2A...
        07-25-2023, 06:56 PM
      • Info13
        Dell H235P-00 Power Supply Failure
        by Info13
        Hi everyone,
        A H235P-00 power supply unit from a Dell Optiplex 760 PC is faulty.
        After removing it from the computer, I placed a paper clip between the green and black wires, then connected it unloaded to the mains through a series lamp.

        ➡️ First test:
        The PSU partially works: the green indicator LED lights up, and the fan starts for one second, then stops.
        A click can be heard at the moment it stops. The series lamp lights up when the power supply starts, then turns off when it shuts down.

        I then followed the advice from the forum and replaced...
        10-22-2025, 01:52 PM
      • reessi
        Acer Alienware Nitro 5 (GH51G LA-L181P Rev: 1C) & Dell Alienware M15 (GDP50 LA-k452P Rev:1) - Both Shorted PCH (SRKMA)!
        by reessi
        Hello:

        I have both these laptops that appeared to have the same fault so I thought I would have a go at replacing the PCH as something to learn, they both are using the same PCH.


        I started on the ACER:

        Up on connecting power no signs of life but current is consumed from the bench power supply and the PCH is hot.
        All the caps on the top of the PCH are showing 0 ohms and the 3.3v rail is shorted.

        I followed the videos from Sorin, Electronics Repair School on Youtube heating from the bottom to install. I practised on around 10 scrap...
        10-29-2024, 11:31 AM
      • Loading...
      • No more items.
      Working...