NAD C541 Cd player Negative rectify ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sevenqi
    Badcaps Veteran
    • Jul 2011
    • 292
    #1

    NAD C541 Cd player Negative rectify ?

    Anyone know how this negative rectify works ? This schematic is from NAD C541 CD player, the input is around ~ 15v to 17v AC, output should be -22V, but I only got around -11v. I checked the capacitor diode, or resistor they all looks OK.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31304
      • Albion
      #2
      Re: NAD C541 Cd player Negative rectify ?

      d510 acts as a voltage regulator.
      what voltage goes into the transistor?

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: NAD C541 Cd player Negative rectify ?

          It's a charge pump voltage doubler. Check the diodes and capacitors. A failed diode or capacitor will disable the doubling function.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • nervous_capybara
              Repairing the Hitachi DA-6000 CD player
              by nervous_capybara
              Hello everyone !

              I recently conducted maintenance on a Hitachi DA-6000 CD player for my grandparents : it had two distinct issues.
              Feel free to share your experience if you ran into other issues.

              DISCLAIMER : BE VERY CAREFULL WHEN OPERATING ON THIS SYSTEM : THE HIGH VOLTAGE IS VERY CLOSE TO THE VARIOUS TESTING POINTS, PROCEED WITH CAUTION

              CD tray would not come out of the player
              I could hear a motor spinning inside the player but the CD tray would not come out.
              Turned out that the issue was the CD tray belt that aged poorly and began to...
              11-05-2025, 03:11 AM
            • Document Archive
              MEDION AKOYA S15447 + ext. DVD Player Notebook Specification for Upgrade or Repair
              by Document Archive
              This specification for the MEDION AKOYA S15447 + ext. DVD Player Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S15447 + ext. DVD Player boardview and S15447 + ext. DVD Player schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any...
              09-06-2024, 05:30 PM
            • asr
              Finding replacement diode iPad Pro 3rd gen A1701
              by asr
              Hello, I am looking for help to replace a damaged diode. The tristar was replaced and a diode was damaged in the process. I have a picture of the diode but dont have an exact donor. I mostly have macbooks for donors and only a few ipad and iphone boards. Diode part number: DSF01S30SCAP
              Im not sure where to find the ipad board number. Anybody have an idea where else this diode is used on other boards? Thanks....
              07-09-2024, 06:24 PM
            • unimatrix93
              TV backlight zener diode
              by unimatrix93
              Hello everyone, I'm repairing an LG TV backlight and I noticed some strange behavior when I touching the backlight strip with a missing Zener diode.

              So I replaced the leds on the strips and they seemingly working fine, but soon as I touch the strip which has a missing Zener diode the whole backlight turns off for a few seconds and then turns back on.

              Is this caused by the missing diode? If so what kind of zener diode should I use to replace it?.
              ​​​​
              The led strips has 9 6V leds.


              ​​​
              1 Photo
              02-10-2025, 12:13 PM
            • Baste
              MBR3045CT and SR3045LCT Schottky diode testing help.
              by Baste
              Hello experts,
              Can anyone educate me on how to test MBR3045CT and SR3045LCT Schottky diodes? I'm totally a newbie in electronics, so forgive me if I have cheap tools. In my effort to repair a Gigabyte PSU, I stumbled upon the two diodes, which I suspect are leaky. I tested this with my two cheap multimeters and the newly bought LCR-T4 MC328, and I got confusing results. Below are my test results.

              Aneng ST182 Meter.

              Diode mode.
              MBR3045CT:
              Diode mode
              Pin 2-1 - 0.150v
              Pin 2-3 - 0.150v ...
              4 Photos
              10-21-2025, 06:14 AM
            • Loading...
            • No more items.
            Working...